Main > Software Forum
shuffleshot - analog settings?
REBIRTH:
Does anyone have Shuffleshot working well? If so, what are your analog settings in Mame?
I am using the Microsoft Intellipoint (Intellimouse) drivers. I have been fooling with the anolog speed/sensitivity and either the disc will not go up the board (stops by the 1 line) or it goes so fast up the board it falls off the back every time. I can't get it so that it will go up the board but at a normal speed. I found one other post that said to set the sensitivity at 20%, but doing that the disc will not go up the board at all. It is like it needs a certain speed to actually move up the board, but once you get it fast enough to do that it will just fly off the back of the board.
Thanks for your help!
Doc-:
I'm not sure what trackball you are using, but I found it unplayable with anything less than a 3" arcade trackball (I have an Imperial/Betson). Once I installed that it worked fine.
quarterstringer:
I'm using a 3" Happs Golden Tee trackball and my settings are all -
Speed 70
Sensitivity 50%
ErikRuud:
Make sure that acceleration is turned off in the intellimouse driver.
The Key/Joystick speed setting should have no effect on the trackball.
I have sensitivity set at 25% on both machines.
By the way, I was able to play Shuffleshot on my laptop using an Itellimouse TrackBall Explorer which is about a 1.25" ball. I do better on my cab with a 3" Betson.
REBIRTH:
thanks for the help - I still can't get it. I have a 3" Happ trackball, have acceleration turned off in the Intellimaouse driver. My PC is a 2 GHZ with 640 mg Ram.
--- Quote from: ErikRuud on June 06, 2004, 10:08:24 am ---The Key/Joystick speed setting should have no effect on the trackball.
--- End quote ---
The speed and sensitivty are the analog settings in the game, not the key/joy speed.