Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Ultimate IPAC 4 Firmware Upgrade?  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

irkella

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:December 13, 2024, 01:07:06 pm
  • I want to build my own arcade controls!
Ultimate IPAC 4 Firmware Upgrade?
« on: December 11, 2024, 11:12:25 pm »
Hi everyone!

I'm dipping my feet in the arcade conversion game by upgrading a previously converted TMNT cabinet, which has its four sticks wired up to what I believe is a 2014 IPAC 4 on firmware 1.30.

I've read that being a pre-2015 board, it's not compatible with the MultiMode firmware, but I just wanted to confirm that, as well as inquire if there's any other worthwhile firmware upgrades to do if that's indeed the case.

See the attached photos, and thanks in advance!


Logged

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9664
  • Last login:Today at 08:08:00 am
  • Designated spam hunter
Re: Ultimate IPAC 4 Firmware Upgrade?
« Reply #1 on: December 12, 2024, 06:27:08 am »
Quote from: irkella on December 11, 2024, 11:12:25 pm
I'm dipping my feet in the arcade conversion game by upgrading a previously converted TMNT cabinet, which has its four sticks wired up to what I believe is a 2014 IPAC 4 on firmware 1.30.
Yes, that is a pre-2015 IPac.

Quote from: irkella on December 11, 2024, 11:12:25 pm
I've read that being a pre-2015 board, it's not compatible with the MultiMode firmware, but I just wanted to confirm that, as well as inquire if there's any other worthwhile firmware upgrades to do if that's indeed the case.
Correct.  Your current IPac isn't compatible with the MultiMode firmware.

A new IPac4 will ship with the latest firmware (v1.55?) already installed so no further updates are needed.


Scott
Logged
Pages: [1]
  
Go Up
« previous next »