Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Kortek MP-KT2182 Opinion  (Read 536 times)

0 Members and 1 Guest are viewing this topic.

Montani

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:February 01, 2024, 08:59:37 pm
  • You and your friends are dead. Game Over
Kortek MP-KT2182 Opinion
« on: January 30, 2024, 11:13:37 am »
Just got a new machine. Just have a vertical line down the middle. Guessing something on the chassis, but I am out of my league. Know who repairs these if it is a chassis issue? Thanks for any help.
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7400
  • Last login:Today at 01:54:30 am
  • I break stuff...then fix it...sometimes
Re: Kortek MP-KT2182 Opinion
« Reply #1 on: January 30, 2024, 02:42:22 pm »
that's an odd issue. horizontal collapse... but not totally? or maybe sync problem?

must have a seperate circuit to drive the yoke... seperate from the flyback HV (usually these things are tied together.)

i say it's not totally collapsed... because if it was the line would only be a few MM wide. (like an 1/8")
Logged

Montani

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:February 01, 2024, 08:59:37 pm
  • You and your friends are dead. Game Over
Re: Kortek MP-KT2182 Opinion
« Reply #2 on: January 30, 2024, 03:20:36 pm »
I'm out of my league. I've verified the display from the global vr PC on a separate monitor. Something is up with this chassis. Appreciate any info on who can refurb these.
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7400
  • Last login:Today at 01:54:30 am
  • I break stuff...then fix it...sometimes
Re: Kortek MP-KT2182 Opinion
« Reply #3 on: January 31, 2024, 08:11:40 pm »
where you at? maybe someone close by can chime in or has the experience to give you a hand with it.

other than that you are going to be shipping it off... arcadecup if you are east coast ... but i hear they can have a pretty big backlog and sometimes it can take a month to get to your chassis... but i have heard great things about their service.

Logged

Montani

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:February 01, 2024, 08:59:37 pm
  • You and your friends are dead. Game Over
Re: Kortek MP-KT2182 Opinion
« Reply #4 on: January 31, 2024, 08:41:25 pm »
Quote from: lilshawn on January 31, 2024, 08:11:40 pm
where you at? maybe someone close by can chime in or has the experience to give you a hand with it.

other than that you are going to be shipping it off... arcadecup if you are east coast ... but i hear they can have a pretty big backlog and sometimes it can take a month to get to your chassis... but i have heard great things about their service.
Morgantown. About an hour south of Pitt. I think my yoke is bad and not the chassis. Had .9ohms on the blue and red wire. Pulled it and has a couple bad spots.
Logged
Pages: [1]
  
Go Up
« previous next »