Author Topic: Daytona USA Twin Aracde Monitor issue (Read 751 times)

Rayboss9 · « **on:** December 17, 2023, 09:42:42 am »

Hi,
I have q Sega Daytona Twin sit down arcade game. the monitor number (from the manual) is 2001-5187-15.
The issue I am experiencing is that on one of the monitors it only displays in a horizontal line about one inch high
for the entire width of the monitor in the center of the screen. Is this a monitor issue or a board issue?
I have attached a picture of the monitor in distress.
Thanks,
Ray

buttersoft · « **Reply #1 on:** December 18, 2023, 05:18:36 am »

That's a board issue for sure.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Daytona USA Twin Aracde Monitor issue (Read 751 times)

Rayboss9

Daytona USA Twin Aracde Monitor issue

buttersoft

Re: Daytona USA Twin Aracde Monitor issue