Looking for some help with Friction...

Main > Lightguns

<< < (4/8) > >>

lilshawn:
all my files are original unmodified files, and it seems to work just fine on any random computer.

my file md5 is also 25a0495caecaf9bee66b09f13da5e8fa

let's get back to "stock" and see if it works from there.

obs, rename the file.

purbeast:
I mean mine are also "unmodified" in the sense that I just got them from some the bundles I found online.

Can one of you attach the DLL here and I can give that a try?

lilshawn:
i posted it as an attachment on my last post there. you just have to rename it. (it's just to get around the file filter) if you want to post your modified file and i can try it here and see if that the issue as well.

purbeast:
Okay awesome that DLL worked for me, in 2 of the versions I tried it on. I didn't try the 3rd but that looks to be the problem.

Now my question is, does anyone know how to get this game to work in 320x240 resolution?

I know the actual real game works at that resolution, because I have the real arcade hardware and it works on my CGA monitor. Changing the resolution is a jumper on the IO board.

But does anyone know how to change it for this game?

It looks like the lowest it runs at for me is 640x480, which basically shows a double screen on a CGA monitor. I tried changing the resolution down in the /base/win.cfg file to 320x240 but that didn't do anything. I also used the Friction resolution changer thing and set to 320x240 and that also did not work.

So anyone have any ideas? I'm so close!

lilshawn:
I don't recall if it supported 15k or not. Ours was just VGA cause that's what we had.

You might have to run it through a scaler if that's the case.

Navigation

 Message Index

Go to full version