Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Strange volume control fault on Rowe R84 Jukebox  (Read 706 times)

0 Members and 1 Guest are viewing this topic.

emslots

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:May 23, 2023, 07:49:21 am
  • I want to build my own arcade controls!
Strange volume control fault on Rowe R84 Jukebox
« on: May 20, 2023, 01:50:59 pm »
Recently a friend asked me to repair his R84's amplifier, type 6-07438-02, which has an annoying fault - when the volume control is turned up, the sound level is fairly low, but suddenly becomes very loud at around the halfway setting of the potentiometer.

I know this is not down to the pot being faulty, as this has been replaced with a new one.

All four dual op amps in the preamp have been replaced (two are LM1303N, and two are TBA231A, both being pin for pin replacements for the original RC4739DB op-amps).

The two safety lamps in the preamp have also been replaced, as have all of the electrolytic capacitors.

Can anyone shed any light on what has become a frustrating problem?



« Last Edit: May 20, 2023, 02:41:48 pm by emslots »
Logged
Pages: [1]
  
Go Up
« previous next »