Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 2005 golden tee troubleshooting help please.  (Read 117 times)

0 Members and 1 Guest are viewing this topic.

thatpinballguy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:July 17, 2022, 02:59:04 pm
  • I want to build my own arcade controls!
2005 golden tee troubleshooting help please.
« on: July 06, 2022, 02:18:34 pm »
Good day, I have a 2005 golden tee fore that I am trying to repair.  I am hoping to get some guidance to do this.  It is a green board.  It was working but the old owner had a power surge. 

This is what I have come up with so far:
The status 1 led is off. 
The status 2 is flashing
IDE led is flashing as well

I borrowed a working set to eliminate possibilities.  I was able to get the game to boot and show on screen with his board using my hard drive, my video card and my boot chip. 

When I reinstall my board, status 1 light is still off, no boot and nothing on screen.  There is a ticking sound through the speakers too.  I measured the voltage on the boot chip and I get 5.1v at the first and last pins.

I am not sure what my next step would be to work towards getting this board to boot.  Any suggestions would be appreciated?

Brian

« Last Edit: July 06, 2022, 11:11:21 pm by thatpinballguy »