Ok, I've been scouring the interwebs and have not been able to determine with certainty how to connect a Jamma Harness to a Single Slot Coin Door.
The end of the Jamma harness has a bundle of 3 wires consisting of White/Coin 1, Yellow 12v and Black Ground which terminate in the below connector
My coin door has the following connections. Do I cut the White/Coin 1 wire and attach it to one of these connectors along with a Ground from that same plug? Assuming that since I don't have a second coin door, I don't do anything with the the Coin 2 wire, correct?
As far as power, the coin door came wired to terminate into a standard plug. Should I keep this as is and plug into an outlet, or would it be better to get power from the Jamma harness?