Ultimarc MagStick Plus and Reyann/EasyGet

[San]

Hi everyone,

   Hoping someone can help me out.  I am looking to integrate a MagStick Plus in to my arcade cabinet, but I can’t seem to find a wiring diagram for a Reyann/EasyGet USB encoder.  I will be using retropie, but I am hooking the USB encoder into a Windows box just to test the buttons and joystick calibration.

Thanks,

[meyer980]

Isn't that just another name for the Zero Delay encoders? If so, here ya go: https://images-na.ssl-images-amazon.com/images/I/71LFCa7R6uL._AC_SL1500_.jpg

They're detected as gamepads/joysticks in windows so it's also very easy to test. Plug into a computer, hook up a button, go to "Devices and Printers", right click the Zero Delay controller and choose Game Controller Settings, Click properties, and you'll see a little screen where you can preview each of the buttons pushed and what windows labels them as. I've attached what it looks like for an Xbox controller.

Good luck!

[PL1]

I can’t seem to find a wiring diagram for a Reyann/EasyGet USB encoder.

How about this one?
- Use the 2Pin Joystick connectors hooked to the NO (Normally Open) and COM (Common) tabs on the Mag-Stick microswitches.



- Remember that the actuator moves opposite of the handle so if you push the handle right, the actuator presses the switch on the left.




Scott