Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Jennifer has issues  (Read 74687 times)

0 Members and 2 Guests are viewing this topic.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #280 on: April 14, 2021, 09:16:11 pm »
Why did you go back and zero out your posts?


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7363
  • Last login:Today at 01:05:20 am
  • I break stuff...then fix it...sometimes
Re: Jennifer has issues
« Reply #281 on: April 15, 2021, 07:33:13 pm »
she's nuking... goin' off the grid...

*tinfoil hat*

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:March 17, 2024, 01:15:07 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifer has issues
« Reply #282 on: April 15, 2021, 08:01:37 pm »
Why did you go back and zero out your posts?

PBJ and or Chance are her heroes?
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10867
  • Last login:Yesterday at 11:09:19 pm
  • Obey.
    • The Chris Burke Band
Re: Jennifer has issues
« Reply #283 on: April 15, 2021, 08:21:59 pm »
What, no Tully?  Cmon, man.


Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:March 17, 2024, 01:15:07 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Jennifer has issues
« Reply #284 on: April 16, 2021, 10:39:20 am »
What, no Tully?  Cmon, man.

Tully was awesome, so wouldn't be any fun to lump you in with him.
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #285 on: April 16, 2021, 05:39:35 pm »
Seriously, what’s going on? Why are you zeroing things out? I’m trying to follow along with what you’re doing, but if you’re gonna keep erasing stuff…


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10867
  • Last login:Yesterday at 11:09:19 pm
  • Obey.
    • The Chris Burke Band
Re: Jennifer has issues
« Reply #286 on: April 16, 2021, 06:06:56 pm »
I saw $20 worth of scrap metal in the back of a rusted out pick up truck.  Definitive proof of a $15,000 Star Wars cabinet with a 33" vector monitor.

 :cheers:


Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Yesterday at 04:21:02 pm
  • This plan is foolproof
Re: Jennifer has issues
« Reply #287 on: April 16, 2021, 08:05:15 pm »
Chopping up a Red Baron?

What the ---fudgesicle--- is wrong with you?

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:Yesterday at 11:41:19 pm
Re: Jennifer has issues
« Reply #288 on: April 16, 2021, 08:43:42 pm »
Maybe we could just move on from the whole criticizing / mocking Jenn thing? It's gotten really boring.  I'd just like to see a consecutive series of posts from her on whatever it is she's up to ... including pictures.  Please don't nuke any more content Jenn. She acknowledges she has issues, it's in the title FFS.  She's also a long standing member of the community here.  Haterz go play somewhere else.

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Yesterday at 04:21:02 pm
  • This plan is foolproof
Re: Jennifer has issues
« Reply #289 on: April 16, 2021, 08:49:51 pm »
Sorry Ond. She is hacking up a rare classic cabinet.

That is not okay.

And she has been mocking me for months. I left the forum for 2 months and she continued to mock me.

So I like you Ond, but she dishes it out constantly. Maybe you should have a talk with her.
« Last Edit: April 16, 2021, 08:53:12 pm by Mike A »

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:Yesterday at 11:41:19 pm
Re: Jennifer has issues
« Reply #290 on: April 16, 2021, 09:11:17 pm »
Sorry Ond. She is hacking up a rare classic cabinet.

That is not okay.

And she has been mocking me for months. I left the forum for 2 months and she continued to mock me.

So I like you Ond, but she dishes it out constantly. Maybe you should have a talk with her.

I know Mike, if you've read my posts you know I don't like hacking cabs either especially not rarer ones, I know she continues to take pot shots at you.  I'm going to ask you again Jenn, please just post your work and maybe leave out the mocking?  You can ignore me and continue on in the same way but what is the point?  I get it, you're a free spirit and no ones going to tell you what to do. I wouldn't even bother posting if I wasn't genuinely interested in your projects.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Jennifer has issues
« Reply #291 on: April 16, 2021, 09:29:43 pm »
I wish that was only 20 bucks worth of steel, Try two hundred, Guessing you don't buy steel or weld either there Jim (Go buy a welder ), The aluminum sub frame hopefully will set off the weight/strength numbers...Chopping up that new (working) Red Baron for parts is going to break my heart however, Such a little cutie,  and makes me really sad to know her fate...As for zeroing out my posts, well don't worry about it I guess I just won't bother posting updates at all then...Problem solved.
I thought the whole point was to share your projects because you want to teach others? I’ve been following your posts because I’m interested in what you’re building. But you’re just zeroing out your posts for no reason, with no apparent trigger.


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10867
  • Last login:Yesterday at 11:09:19 pm
  • Obey.
    • The Chris Burke Band
Re: Jennifer has issues
« Reply #292 on: April 16, 2021, 09:40:39 pm »
At least she found a picture of a Red Baron that doesn’t have a reflection of someone distinctly not her in it.

 :cheers:

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:Yesterday at 11:41:19 pm
Re: Jennifer has issues
« Reply #293 on: April 16, 2021, 09:48:29 pm »
No apparent trigger  ^

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:Yesterday at 11:41:19 pm
Re: Jennifer has issues
« Reply #294 on: April 16, 2021, 09:48:52 pm »
No apparent trigger  ^

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #295 on: April 16, 2021, 10:02:33 pm »
No apparent trigger  ^
She’s been deleting those posts for the last few days. Look at the time stamps. PBJ had nothing to do with it. He’s reacting to what she did, not the other way around.


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:Yesterday at 11:41:19 pm
Re: Jennifer has issues
« Reply #296 on: April 16, 2021, 10:35:18 pm »
Time stamps?  *sigh*  So, I asked if perhaps folks could lay off Jenn.  I then asked if perhaps Jenn could be mindful of provocation as well.  And then PBJ posts provocation. Was he posting a comment about post deletion?  No.  Just the same old ---steaming pile of meadow muffin---.  But that's OK cos PBJ gotta PBJ right?

Don't defend obvious provocation, it insults my intelligence.  Jenn deleting her own ramblings with almost no visual context is not much to "follow".  I guess expecting something a bit higher of BYOAC is just me being ignorant.

Well, go to it then. 

pbj

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10867
  • Last login:Yesterday at 11:09:19 pm
  • Obey.
    • The Chris Burke Band
Re: Jennifer has issues
« Reply #297 on: April 16, 2021, 10:39:32 pm »
I’m sick of threads getting wrecked on this board with her nonsense.  At this point, I’m not believing a thing until I see time stamped photos.  Anyway, you’re right.  I’ll just put her on ignore and move along.

 :cheers:

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Yesterday at 04:21:02 pm
  • This plan is foolproof
Re: Jennifer has issues
« Reply #298 on: April 16, 2021, 10:46:48 pm »
You have to be kidding Ond.
She shits on other people all of the time.
She brags about hugely expensive projects and refuses to share any details or pictures.
You can't come back in here act all righteous after all of that.
We are sick of the lies.
Maybe your intelligence should be insulted by that.
I like you Ond, but there is a reason people are on her. We are tired of her crazy ---That which is odiferous and causeth plants to grow---.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Jennifer has issues
« Reply #299 on: April 16, 2021, 10:57:56 pm »
Time stamps?  *sigh*  So, I asked if perhaps folks could lay off Jenn.  I then asked if perhaps Jenn could be mindful of provocation as well.  And then PBJ posts provocation. Was he posting a comment about post deletion?  No.  Just the same old ---steaming pile of meadow muffin---.  But that's OK cos PBJ gotta PBJ right?

Don't defend obvious provocation, it insults my intelligence.  Jenn deleting her own ramblings with almost no visual context is not much to "follow".  I guess expecting something a bit higher of BYOAC is just me being ignorant.

Well, go to it then.
With all due respect, you’re off base. She started deleting posts on the 13th for no apparent reason.
No one did or said anything to cause her to behave like that. I’m just trying to figure out why she’s acting that way. Her deleting posts two days ago and Jim saying something today have nothing to do with each other. And quite frankly I find her deleting posts like that to be just as obnoxious behavior.

I too have higher expectations for the way people are here at BYOAC. Jennifer is a grown woman. She knows what she’s doing.


Sent from my iPhone using Tapatalk
« Last Edit: April 16, 2021, 11:11:22 pm by yotsuya »
***Build what you dig, bro. Build what you dig.***

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #300 on: April 16, 2021, 11:23:02 pm »
The reason for the nuke is Mike the troll (not Pbj)...Wild claims?, big ideas? 100 machines where? What post was that?..I could prove them wrong with the click of the camera, but I won't, I will not be bullied into it...I share because it is fun and I owe them NOTHING!
But Mike said nothing on the 13th. You even erased the helpful advice you gave Lilshawn the other day. You just started deleting posts for no reason. Mike had nothing to do with that. He’s just a convenient excuse.

I had been following this thread with interest, because I like learning new things and I was interested in seeing what you were going to make. But I think I’ll bow out as well, because quite frankly I don’t know what you’re trying to accomplish here with the thread.


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

Ond

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2267
  • Last login:Yesterday at 11:41:19 pm
Re: Jennifer has issues
« Reply #301 on: April 16, 2021, 11:33:17 pm »
The reason for the nuke is Mike the troll (not Pbj)...Wild claims?, big ideas? 100 machines where? What post was that?..I could prove them wrong with the click of the camera, but I won't, I will not be bullied into it...I share because it is fun and I owe them NOTHING!

I'm not bullying you.  I'm asking you.  You are sabotaging your posts because of a feud with Mike.  let it go.  In fact, so long as you persist in childishness, I will continue to respectfully ask you to contribute to the forum in a normal fashion. 

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Yesterday at 04:21:02 pm
  • This plan is foolproof
Re: Jennifer has issues
« Reply #302 on: April 17, 2021, 07:52:46 am »
The last time I posted in this thread was a month ago and that was in response to Jennifer ---steaming pile of meadow muffin--- talking me about not showing pics of my work. I post tons of pics. Ond please get your facts straight before you condescend to us. We are reacting to crazy behavior, not causing it.

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Yesterday at 04:21:02 pm
  • This plan is foolproof
Re: Jennifer has issues
« Reply #303 on: April 17, 2021, 11:56:16 am »
There it is again.
She can't help herself.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2895
  • Last login:August 11, 2023, 06:24:58 am
Re: Jennifer has issues
« Reply #304 on: April 17, 2021, 12:18:40 pm »
There it is again.
She can't help herself.
There it is what?...I won't be bullied into giving you pics as some kind if ego trip.
« Last Edit: April 17, 2021, 12:38:31 pm by jennifer »

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5880
  • Last login:Yesterday at 04:21:02 pm
  • This plan is foolproof
Re: Jennifer has issues
« Reply #305 on: April 17, 2021, 12:56:57 pm »
Well we can't see what because you keep deleting your comments like a lunatic.

You went on another rant insisting that I never do any arcade work. And then you deleted it.

I didn't ask for pics this time.

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2895
  • Last login:August 11, 2023, 06:24:58 am
Re: Jennifer has issues
« Reply #306 on: April 17, 2021, 01:12:55 pm »
True, you diddnt, and I will stop nuking posts, Enough damage has been done as project "Scorched Earth"...Nice job on that C/p Mike, Gotta love new steel 😜, Those square holes are drilled with a rotary broach nowadays, little spendy at around 350.00 for the holder, and 60.00 bits...But money well spent if you plan to do alot of it... (Imo)

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #307 on: April 17, 2021, 07:13:52 pm »
True, you diddnt, and I will stop nuking posts, Enough damage has been done as project "Scorched Earth"...Nice job on that C/p Mike, Gotta love new steel , Those square holes are drilled with a rotary broach nowadays, little spendy at around 350.00 for the holder, and 60.00 bits...But money well spent if you plan to do alot of it... (Imo)
I miss having a plasma CNC do the square holes for me!


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2895
  • Last login:August 11, 2023, 06:24:58 am
Re: Jennifer has issues
« Reply #308 on: April 17, 2021, 10:24:14 pm »
I have never even seen a CNC plasma much less ever used one, we used a punch press back in the day, Square holes are not as easy to make nice as some may think...Well today, I ran into my first miscalculation, about 1/8" off from Square, (wing strut) I can fix this, but it would have been better not to, Obviously...It is easier to finish shaping all the parts before final assembly.
« Last Edit: April 17, 2021, 10:27:41 pm by jennifer »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #309 on: April 17, 2021, 10:41:37 pm »
I have never even seen a CNC plasma much less ever used one, we used a punch press back in the day, Square holes are not as easy to make nice as some may think...Well today, I ran into my first miscalculation, about 1/8" off from Square, (wing strut) I can fix this, but it would have been better not to, Obviously...It is easier to finish shaping all the parts before final assembly.
Are those solid pieces or hollow?


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:February 09, 2024, 04:32:11 pm
Re: Jennifer has issues
« Reply #310 on: April 17, 2021, 10:44:42 pm »
True, you diddnt, and I will stop nuking posts, Enough damage has been done as project "Scorched Earth"...Nice job on that C/p Mike, Gotta love new steel , Those square holes are drilled with a rotary broach nowadays, little spendy at around 350.00 for the holder, and 60.00 bits...But money well spent if you plan to do alot of it... (Imo)
I miss having a plasma CNC do the square holes for me!


Sent from my iPhone using Tapatalk

Get that MPCNC going  ;D ;)




(By the way kids, never film plasma cutting or welding without an ND filter on the camera. Photo sensors can burn out just like your retinas.)
« Last Edit: April 17, 2021, 10:48:00 pm by Vigo »

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19955
  • Last login:March 17, 2024, 12:41:11 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Jennifer has issues
« Reply #311 on: April 17, 2021, 10:45:16 pm »
True, you diddnt, and I will stop nuking posts, Enough damage has been done as project "Scorched Earth"...Nice job on that C/p Mike, Gotta love new steel , Those square holes are drilled with a rotary broach nowadays, little spendy at around 350.00 for the holder, and 60.00 bits...But money well spent if you plan to do alot of it... (Imo)
I miss having a plasma CNC do the square holes for me!


Sent from my iPhone using Tapatalk

Get that MPCNC going  ;D ;)


Oh HELL YEAH!!!!!!


Sent from my iPhone using Tapatalk
***Build what you dig, bro. Build what you dig.***

Zebidee

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3227
  • Last login:March 16, 2024, 11:56:34 pm
Re: Jennifer has issues
« Reply #312 on: April 18, 2021, 02:28:37 am »
Nice to see some pics Jenn :D Can you indulge us with a rough drawing?
Check out my completed projects!


Vigo

  • the Scourage of Carpathia
  • Global Moderator
  • Trade Count: (+24)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6417
  • Last login:February 09, 2024, 04:32:11 pm
Re: Jennifer has issues
« Reply #313 on: April 18, 2021, 02:21:31 pm »
Hey Jenn, I've been wanting to start welding for some project I have that require it to do the job right. Got some cracked exhaust on a motorcycle, a damaged trailer, some cracks in an aluminum boat. You think a stick welder is good enough for someone who will be doing more casual welding like that, at least for a forseeable time or is a Tig a game changer? I don't necessarily mind a learning curve as much as I can recruit someone to help teach me, but I do care about the space and investment.

Ropi Jo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:January 30, 2024, 04:26:37 pm
  • I want to build my own arcade controls!
Re: Jennifer has issues
« Reply #314 on: April 18, 2021, 04:07:57 pm »
I've got a qualification in MMA (stick) welding. Well actually it's a certificate for completing the first part of a 4 part course. The truth is I suck at welding. The instructor made it look so simple. His welds were a work of art. My welds looked like bird poo.

I ditched the arc welder and now have a flux cored. I'm getting better having watched many youtube vids for tips.

I need to get good enough for a project waiting to start... a narrow hoist (like an engine hoist) that will go though a normal doorway and will lift around a ton to 4 feet height.

I'm definitely not nearly good enough yet. I need Jenn to fly over to the UK and 'metal-glue' it together for me!

Zebidee

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3227
  • Last login:March 16, 2024, 11:56:34 pm
Re: Jennifer has issues
« Reply #315 on: April 19, 2021, 12:06:32 am »
My bro in law learned some welding and got a certificate, but stopped because his eyes hurt. Scary stuff. Get a good helmet! He needed your advice Jenn.

I sometimes want to do a bit of welding here or there, but not much. Joining a piano hinge onto the bottom of a metal control panel is top of my list (so you can unhook from inside/below then swing control panel out for servicing). Weld would be on the inside so out-of-sight. Guess arc because it is cheapest/easiest, even if it isn't the prettiest. I won't be welding any visible joints for a while anyway.
Check out my completed projects!


jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2895
  • Last login:August 11, 2023, 06:24:58 am
Re: Jennifer has issues
« Reply #316 on: April 19, 2021, 12:49:19 am »
That's actually done with a spot weld,  It is grabbed on both sides and burned together, it is basically how cars are built...You don't need a welder to build a arcade machine however, Working steel takes years to even begin to understand the story it tells, But basic, sticking things together, patching control panels yes it ups your game over glue and such, What I am doing here is so far from a "normal" build it shouldn't even be considered by most...A viable alternative is your local weld shop (probibally not cheap), but for small projects is probably the easiest quickest way as a means to an end.
« Last Edit: April 19, 2021, 12:54:46 am by jennifer »

Zebidee

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3227
  • Last login:March 16, 2024, 11:56:34 pm
Re: Jennifer has issues
« Reply #317 on: April 19, 2021, 03:44:30 am »
Now I think again, I'll just get a local guy to do my welding. It is ridiculously cheap here. As long as the job is simple enough. Thailand has a different economy, at least these rural parts do. Basic stuff is easy enough for them to do, saves me time and money.

Local tradies mostly can't follow a plan and that limits what they can do. For example local carpenters. I've been burned by them many times before. I still use them, but I keep it to basic stuff I know they are capable of, and keep a close eye. They usually better at following pictures. We still have a shitload of nice hardwood to use up before the termites and rot set in, would rather it be stools, tables and toilet roll holders something.
Check out my completed projects!


jennifer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2895
  • Last login:August 11, 2023, 06:24:58 am
Re: Jennifer has issues
« Reply #318 on: April 21, 2021, 01:59:18 am »
I am not so sure anyone around here even knows what it is they are actually even looking at...That is a HVLP fitted with a 3M pps 2.0 disposable cup system, It will actually spray not only ultra heavy solids like I have been talking about, but it will even spray upside down under a vacuum (not gravity)...Kind of a big deal.
« Last Edit: April 21, 2021, 02:05:17 am by jennifer »

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7363
  • Last login:Today at 01:05:20 am
  • I break stuff...then fix it...sometimes
Re: Jennifer has issues
« Reply #319 on: April 21, 2021, 08:45:49 pm »
Nah, I just only check like once a day ....or 2.

This being laid off for a year thing has changed me.