Triple screen crt display with Groovymame install

[Moksi]

Hello ,
This is my first time installing this software , i aqquired an Beovision MX4000 CRT for use with Mame (mostly Arcade games)
my system is Win 7 64Bit , GPU Radeon R9 380. 
I followed this guys guide for installing Groovymame  .
Everything was installed without problems.     
I use an dvi-i port , so with an dvi-i cable to vga - > into the usma scart adapter -> scart to tv .

i also see that that EDID emulation is detecting Output:  Digital_7 DVI-i enabled - GENERIC_15

But i do have one problem unfortunetely i get an triple screen display on the crt

Any help appriciated

[Moksi]

settings in video mode

[Calamity]

Don't select an output labelled as "Digital" for EDID emulation, it won't work, select the one named "VGA" if it exists (it should).

[Moksi]

Yes i had someone helping me out its solved now , the device i set to generic pnp , output set to analog vga. removing the lcd hdmi connected to the gpu
It works

[Moksi]

thx