Arcade Collecting > Merit/JVL Touchscreen
JVL Retro Help
mahkeymike:
The CF card is under the motherboard. You need to remove the board to get to the CF card.
fewpheonix:
Finally got the cf card out. Is there anyone out there who is willing to share the image I need (turns out it is itouch9) to write to a new cf card. Also need to know - can it be any size cf card as big or bigger than original? What should the cf card be formatted as (FAT32, etc.)? Thanks all!
mahkeymike:
I have a itouch 9 CF card laying around somewhere. I'll see if i can find it and image it for you. As far as card size, you need at least 512mb. You will most likely find 4gb + cards very cheap on ebay or amazon. I dont think it maters, but i wouldn't get anything larger then 8gb. As far as formatting, it doesnt natter, the image with take care of formatting. Its linux based OS anyway so its probably ext2 , not fat32.
mahkeymike:
Itouch 9 1.0h
http://www.mediafire.com/file/6a44jebqw01lp14/Itouch9.img/file
fewpheonix:
Thank you so much! Is the file drag and drop, or do I need to run a program like WinImage to restore the image to the cf card?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version