I have been trying to connect an ipac4 to a raspberry pi 4 2gb running lakka. The ipac is seen in the usb device list displayed by lsusb.
Here is the output of lsusb -v -d d209:0430
Bus 001 Device 006: ID d209:0430 Ultimarc
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0xd209 Ultimarc
idProduct 0x0430
bcdDevice 0.30
iManufacturer 5 (error)
iProduct 5 (error)
iSerial 3 9
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 109
bNumInterfaces 0
bConfigurationValue 1
iConfiguration 2 (error)
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
cannot read device status, Resource temporarily unavailable (11)
The command usb-devices displays these errors
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=d209 ProdID=0430 Rev=00.30
S: SerialNumber=9
C: #Ifs= 0 Cfg#= 1 Atr=a0 MxPwr=500mA
cat: can't open '/sys/bus/usb/devices/usb1/1-1/1-1.2/1-*:?.*/bInterfaceNumber': No such file or directory
cat: can't open '/sys/bus/usb/devices/usb1/1-1/1-1.2/1-*:?.*/bAlternateSetting': No such file or directory
cat: can't open '/sys/bus/usb/devices/usb1/1-1/1-1.2/1-*:?.*/bNumEndpoints': No such file or directory
cat: can't open '/sys/bus/usb/devices/usb1/1-1/1-1.2/1-*:?.*/bInterfaceClass': No such file or directory
cat: can't open '/sys/bus/usb/devices/usb1/1-1/1-1.2/1-*:?.*/bInterfaceSubClass': No such file or directory
cat: can't open '/sys/bus/usb/devices/usb1/1-1/1-1.2/1-*:?.*/bInterfaceProtocol': No such file or directory
I: If#=bash: invalid number '0x'
0 Alt=bash: invalid number ''
0 #EPs=bash: invalid number '(none)'
0 Cls=() Sub= Prot= Driver=
I've tried raspbian and retropie they both display the same errors. Is there anyway to fix this?