I've seen some great troubleshooting on an old thread that I tried to follow for my situation, but it seems mine might be a little different.
My monitor went out the other day. Pulled the main board (Kortek MP-KT2182), plugged it in on the workbench and I get ticking. I found the Horiz Output Transistor and it's a 5 pin. VCC (+50V) and drain voltages are not steady. Outputs from the main transformer are also not steady. I don't have the tube or neck board connected, if that makes a difference.
Where should I go next in troubleshooting?
TIA!!