Software Support > GroovyMAME

Crt emudrivers adrenalin update needed

<< < (9/16) > >>

psakhis:
I'm upgrading cpu and i will install groovyarcade and w10 with dual boot.

I'll check if i can update vulkan drivers on w10.

I updated drivers with last opengl and vulkan from adrenalin 21.5.2.

crt_emudriver_&_tools_2.0_beta_15_21.5.2_W.10-64
https://drive.google.com/file/d/1fZ6CB8rSCdxEohYmIDPTxYc40LGx3bh7/view?usp=sharing

I tested vulkan with cemu and working with async shaders. I'll need to test opengl.

flybynight:
I have no speed issues with super model and the standard calamity drivers.

Here is what I do

Windows 10 (latest version)
Tri sync crt auto switching
Emudriver
Manually add modelines for 496×384 (model 3 medium resolution)
Run super model passing the 496×384 resolution parameter. The crt switches to medium resolution and the games play fine. Arcade perfection!

You do the same thing with the m2 emulator. Set the resolution in the m2 config file to 496×384

Dalba:

--- Quote from: psakhis on June 15, 2022, 06:25:54 am ---I'm upgrading cpu and i will install groovyarcade and w10 with dual boot.

I'll check if i can update vulkan drivers on w10.

I updated drivers with last opengl and vulkan from adrenalin 21.5.2.

crt_emudriver_&_tools_2.0_beta_15_21.5.2_W.10-64
https://drive.google.com/file/d/1fZ6CB8rSCdxEohYmIDPTxYc40LGx3bh7/view?usp=sharing

I tested vulkan with cemu and working with async shaders. I'll need to test opengl.

--- End quote ---

Hello,
With your updated driver, do we have to launch "VulkanRT-1.3.216.0-Installer.exe" or the classic "setup.exe" is enough ?
And thanks for sharing this !

psakhis:
With classic setup is enough, but i think maybe opengl will be better keep to 18.5.1.

I don't find any advantatge to update opengl and has not been tested enough

Moksi:

--- Quote from: psakhis on July 11, 2022, 09:57:08 am ---With classic setup is enough, but i think maybe opengl will be better keep to 18.5.1.

I don't find any advantatge to update opengl and has not been tested enough

--- End quote ---

Just tried the swapping method  Replacing files of system32 and syswow64.
      3.1) amdvlk32.dll and amdvlk64.dll
      3.2) amd-vulkan32.json, amd-vulkan64.json etc.   
With the files from 18.5.2 package restarted but still distorted on my crt.

Or do i have to replace the crt emudriver 18.5.1 completely with your package by running setup ?

Navigation

[0] Message Index

[#] Next page

[*] Previous page