kade 2.0

[scroeffie]

iam using kade 2.0 with a og xbox so far i like it but some games wont load wit ninja ,so i was thinking i want to move to a rasberry pi
does the kade work with the rasberry pi and is it plug and play ,no need to flash the firmware etc !?!?
thanks 

[PL1]

does the kade work with the rasberry pi and is it plug and play ,no need to flash the firmware etc

If you programmed it with Output Mode set to "Auto detect" (the default setting), the KADE miniArcade 2.0 should auto detect whether connected to an Xbox or a RasPi and change the Output System to "Xbox" or "Generic USB/HID Joypad" accordingly.

If you programmed it with Output Mode set to "Force Xbox", you'll need to reprogram it using the Mapper program.


Scott

[scroeffie]

i did not program anything bought it from bruno as is

[PL1]

He probably used default settings, so it should work with a RasPi.

Worst case scenario, grab the download package containing the Mapper program and User Guide from the link in this post and follow the directions to reprogram your encoder.   


Scott

[scroeffie]

thanks i wil try this in the future or use coinops with the xbox