| Arcade Collecting > Restorations & repair |
| First arcade purchase |
| << < (5/7) > >> |
| yotsuya:
--- Quote from: tealsnk on July 19, 2019, 08:48:10 pm --- --- Quote from: Mike A on July 19, 2019, 08:28:36 pm ---Your next order of business is to go here: http://forum.arcadecontrols.com/index.php/topic,160442.msg1688782.html#msg1688782 --- End quote --- Already marked it on my calendar, Haha! Looking forward to it. Sent from my SM-G955U using Tapatalk --- End quote --- I love the fact in Tapatalk that the default image for that thread is that kid sassy dancing! |
| tealsnk:
So this is what happens when I power on the arcade, if I wiggle the bulb around it flickers and then lights up nice and bright. Will even stay on and work fine, but if I turn off and power back on. It will take forever for the marquee light to turn on eventually. Could it be the starter and where is located. Thanks Sent from my SM-G955U using Tapatalk |
| tealsnk:
--- Quote from: jennifer on July 19, 2019, 09:10:58 pm ---If it's working Jenn wouldnt worry about those lights a manual will tell the details and most likely you can just download a digital copy online...As for that Marque that happens sometimes after being move, check the fuse, replace the starter (little silver can, cheap at hardware store) just make sure voltage rating are the same...and if it still doesn't work change the bulb. --- End quote --- Where is the starter located. So I can remove and replace. Thanks Sent from my SM-G955U using Tapatalk |
| yotsuya:
It’s the little white thing (could also be metal) sticking out of the marquee light base, unless it’s an old-fashioned kind that looks like a little little long lightbulb and would be behind the metal. If it’s the easy to replace kind, you can get those at Ace Hardware or Home Depot. |
| yotsuya:
You should see it if you remove the bulb |
| Navigation |
| Message Index |
| Next page |
| Previous page |