Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


Author Topic: Rowe AMI R1-1G jukebox  (Read 673 times)

0 Members and 1 Guest are viewing this topic.


  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 20, 2019, 06:25:00 pm
  • I want to restore my jukebox
Rowe AMI R1-1G jukebox
« on: February 10, 2019, 07:27:26 pm »
Hi I have a Rowe AMI RI-G1
It has never played a record just sat in the corner for a year as a repairable machine. Thought I had better get on here and seek some help getting it going.
.it powers up
.lights up
.Speakers have a signal going to them.
.Selector buttons depress and engage.
There is no movement in the carousel and the record selector or needle arm don't move all I get is a low electrical hum. 
Opening the glass lid there is a square box on the left hand side with a lever on the top. When I move it to the scan front position the carousel turns freely and in the centre off position it stops. In the rear position nothing occurs.

Any ideas what's wrong?


  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1084
  • Last login:February 19, 2020, 07:48:26 am
Re: Rowe AMI R1-1G jukebox
« Reply #1 on: February 11, 2019, 07:11:34 am »
Hello Steve,

I have responded to your PM.


Alan Hood