***EDIT***
Finally FIXED this particular issue ! Using this thread on the Attract Mode Forums:
http://forum.attractmode.org/index.php?topic=1642.0You need to replace what is in the autostart.sh script found in /opt/retropie/configs/all with
setterm -cursor off
stty -echo
clear
attract 2>&1 | grep -o $'\033\[2J'
You can just make sure that a # is in front of all the existing lines in you would rather save it in case you need to revert back.
Thank you need to make two text files one called runcommand-onstart and one called runcommand-onend. They both need to contain printf "\033[H\033[2J"
Once you created them, rename them to add the .sh to the end and then upload them into the /opt/retropie/configs/all folder.
This can all be done via WinSCP but you can also do it via command line if you want
Pics of what I did to resolve:
My autostart.sh found within (opt/retropie/configs/all) picture below:
I created a .txt file as stated naming it "runcommand-onstart" which contains:
Here is the other file named "runcommand-onend":
changed both of the documents / file type to .sh & placed them all in their respective folder using WinSCP:
****MAKE SURE YOU RESTART / REBOOT To see it resolved... You must reboot / restart shutdown the pi etc and power up again etc.