Author Topic: LEDBlinky Help Needed (Read 1917 times)

Gatt · « **on:** February 25, 2018, 06:55:06 pm »

Hi all,

I'm stumped. I've setup my controls, MAME has no problem with them. I've setup the LEDBlinky mappings, and running through them lights all of my RGBs correctly. But when I start a game in MAME LEDBlinky doesn't light any controls up. I double checked my config for LEDBlinky, all the paths are set except Controller.ini. I enabled debug mode and nothing gets logged when running through Donkey Kong(US Set 1) and DigDug, I tried it through both QMC2 and just running the MAME executable. Does anyone have any suggestions? It's almost like LEDBlinky isn't seeing the games launch.

tony.silveira · « **Reply #1 on:** February 25, 2018, 11:50:52 pm »

are you using a front end to start mame? my experience with LEDblinky is starting it with a FE

Gatt · « **Reply #2 on:** February 26, 2018, 06:59:04 pm »

Yes, I'm using QMC2 as my FE. I also tried it without a front end to no avail


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: LEDBlinky Help Needed (Read 1917 times)

Gatt

LEDBlinky Help Needed

tony.silveira

Re: LEDBlinky Help Needed

Gatt

Re: LEDBlinky Help Needed