Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


Author Topic: arcade monitor problem  (Read 1205 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
  • Trade Count: (0)
arcade monitor problem
« on: March 31, 2002, 12:52:08 pm »
??? i have a problem machine the monitor seems to work for about 5 mins then slowly fades to black and will only restart after a 30 min wait there is constant power running to the monitor but i am at a loss as to what the problem is
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »


  • Guest
  • Trade Count: (0)
Re: arcade monitor problem
« Reply #1 on: May 31, 2002, 11:52:29 am »
It would be helpful if you provided more details - such as type of monitor, is it enclosed, age possibly...  but off hand, I would say you have either an overheating problem, or a power supply failure.  Check to make sure you have enough circulation around it - use a fan on it (not too close - magnets you know...) and see if it stays on for a while longer.  Try swapping the power supply out if you can do so safely - I don't know your level of experience on this stuff, but it's not for the novice tinkerer.  If niether of these work, and it's not under warranty, call around and see what it will cost you to have someone look at it - it may be cheaper to buy a new one - good luck!
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »