Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: need metal cp help  (Read 952 times)

0 Members and 1 Guest are viewing this topic.

rottyguy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:January 26, 2004, 12:03:26 pm
  • I'm a llama!
need metal cp help
« on: January 26, 2004, 12:05:16 pm »
hi, am trying to convert an old rally bike cocktail into a mame system.  got everything in place but the control panel.  it came with metal cp measuring 11 5/16" x 5 1/4" and slants (back to front) from 3" to 1.5".  any idea where i can find replacement cp's for this size/shape?  would like 1 joystick and 2 buttons.

thanks
Logged

Stingray

  • Official Slacker - I promise to try a lot less
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10463
  • Last login:April 08, 2021, 03:43:54 pm
Re:need metal cp help
« Reply #1 on: January 26, 2004, 12:12:37 pm »
Does this panel have any bends in it or is it just a flat piece?

-S
Logged
Quote from: releasedtruth on November 02, 2006, 04:25:16 pm
Stingray you magnificent bastard!
Quote from: Hoopz on October 24, 2012, 02:04:03 pm
This place is dead lately.  Stingray scare everyone off?

rottyguy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:January 26, 2004, 12:03:26 pm
  • I'm a llama!
Re:need metal cp help
« Reply #2 on: January 26, 2004, 12:40:29 pm »
it has 3 bends.

1 bend for a small lip at the back with some screw holes (3/4")
1 bend for the front plate (1.5")
1 bend for a lip that wraps underneath the panel with some screw holes (1.5")

thanks!
Logged

Stingray

  • Official Slacker - I promise to try a lot less
  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10463
  • Last login:April 08, 2021, 03:43:54 pm
Re:need metal cp help
« Reply #3 on: January 26, 2004, 01:01:42 pm »
A local sheet metal shop should be able to duplicate that with no problem if you're unable to find one.

-S
Logged
Quote from: releasedtruth on November 02, 2006, 04:25:16 pm
Stingray you magnificent bastard!
Quote from: Hoopz on October 24, 2012, 02:04:03 pm
This place is dead lately.  Stingray scare everyone off?
Pages: [1]
  
Go Up
« previous next »