this restore is really boring.
Sides are done, so I put this ---smurfette--- on her back. Note the 2 big ass holes that need to be patched, and the rusted out leg leveler plates.
I taped off the back of the holes and filled with bondo. I also put glue under the bottom and clamped, because the front plywood was separating. Previous owner removed the leg levelers and just dragged the cab around because of the wheels on the back.
Close up of the glue job and the new leg levelers from Twisted Quarter.
Front after glue is dried, waiting on bondo to cure.
Bondo sanded down with 60, then 120, then 220 grit:
Front primed. I plan on having a sticker cover all this, or I would have removed the coin doors and had a baller paint job for the whole front.
I also removed, cleaned, and repainted the speaker grill. Forgot to take a picture, but here is under the grill sanded and primed waiting for new paint.
When I get home today I plan to put the first coat of black on everything, maybe even a second or thrid before the nights over. T molding *might get put on too. This weekend I have a bunch of electronics work to do.