Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: need help removing coin door  (Read 2195 times)

0 Members and 1 Guest are viewing this topic.

fastredpacman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:February 19, 2018, 02:12:36 am
  • What?
need help removing coin door
« on: June 13, 2016, 02:29:37 pm »
I have a dynamo cab that I need to remove the over under coin door. I tried looking up a guide but no luck. New to this so could use some advice if you have a guide with pictures even better. Thanks!
Logged

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2540
  • Last login:December 28, 2024, 01:21:59 am
  • SHMUP'EM
Re: need help removing coin door
« Reply #1 on: June 13, 2016, 02:54:18 pm »
Unscrew the brackets, I tried to make it harder than it was my first time as well.
« Last Edit: June 13, 2016, 03:00:34 pm by harveybirdman »
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7515
  • Last login:January 23, 2026, 01:40:05 pm
  • I break stuff...then fix it...sometimes
Re: need help removing coin door
« Reply #2 on: June 13, 2016, 02:57:49 pm »
there are a bunch bolts holding down clips all the way around the inside perimeter of the door.

grab a nut driver, remove all the bolts/clips and the door will basically fall out.

not much to it.
Logged

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2540
  • Last login:December 28, 2024, 01:21:59 am
  • SHMUP'EM
Re: need help removing coin door
« Reply #3 on: June 13, 2016, 03:01:10 pm »
yep added a picture for reference.
Logged

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19964
  • Last login:January 18, 2026, 07:35:09 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: need help removing coin door
« Reply #4 on: June 13, 2016, 03:01:46 pm »
There are these little clips around the edges of the door. Loosen them with a ratchet.

Sent from my SM-G386T using Tapatalk

Logged
***Build what you dig, bro. Build what you dig.***

harveybirdman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2540
  • Last login:December 28, 2024, 01:21:59 am
  • SHMUP'EM
Re: need help removing coin door
« Reply #5 on: June 13, 2016, 03:02:36 pm »
Quote from: yotsuya on June 13, 2016, 03:01:46 pm
There are these little clips around the edges of the door. Loosen them with a ratchet.

Sent from my SM-G386T using Tapatalk

Your Scott-FU is slipping.... Too much solder fumes....
Logged

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19964
  • Last login:January 18, 2026, 07:35:09 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: need help removing coin door
« Reply #6 on: June 13, 2016, 03:02:43 pm »
Looks like I picked the wrong week to stop sniffing glue...

Sent from my SM-G386T using Tapatalk

Logged
***Build what you dig, bro. Build what you dig.***

fastredpacman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 183
  • Last login:February 19, 2018, 02:12:36 am
  • What?
Re: need help removing coin door
« Reply #7 on: June 13, 2016, 09:22:37 pm »
Wow seems easy, thanks for the help!!
Logged
Pages: [1]
  
Go Up
« previous next »