Originally, this was just going to be an RPi MAME build. So this past week, I've been undoing things such as removing battens in the back and routing out a 1/4" rabbet along the back sides to fit a normal size DK door.
Also, I wasn't planning to use any of the interior braces for the monitor or DK board from the Gaetan plans. So I had to build a template for these using the scale drawings that I printed last year. This template ensures that I install the panels supports exactly the same way on both sides of cabinet.
![](http://i.imgur.com/l4zGdlm.jpg)
Also, I'm not so sure the monitor is fitting correctly using the Gaetan drawings. I've posted a question over to the Monitor/Video section:
http://forum.arcadecontrols.com/index.php/topic,155255.0.htmlHere are the pictures of the dry fit for the monitor. I haven't glued down anything yet and can move or change sizes of the panels supporting the monitor, etc.
![](http://i.imgur.com/6REDsR7.jpg)
![](http://i.imgur.com/jirfPmc.jpg)
Finally, I got all the wires from Mike's Arcade for the DK board. I'm going to power this on next weekend and see what problems I have.
![Smiley :)](http://newforum.arcadecontrols.com/Smileys/default/smiley.gif)
![](http://i.imgur.com/KDsRw2k.jpg)
Finally, I'm going to fix the black paint inside the cab to better match a DK cabs.