Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: rowe cd100a wire harness problem  (Read 1483 times)

0 Members and 1 Guest are viewing this topic.

du24pont24

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 39
  • Last login:April 30, 2017, 12:49:56 pm
  • I have a CD100a Rowe Juke box.
rowe cd100a wire harness problem
« on: February 27, 2016, 10:42:36 pm »
Can anyone tell me were I can find the metal end that clips into the harness.  It should be on the end of the loose wire!   Or do I havewe to buy a whole new harness and splice the 3 wires together?  Also what is the wire I would need to buy, the wire is very short to plug into the harness.
Thanks for any info!
Logged
Derek
South Bend, IN, USA

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7400
  • Last login:Yesterday at 07:01:05 pm
  • I break stuff...then fix it...sometimes
Re: rowe cd100a wire harness problem
« Reply #1 on: March 03, 2016, 02:27:41 pm »
They are all standard connectors.  You should be able to buy one and crimp on a replacement.

If you are brave you can plug the pin connector out and reattach the wire and then reinsert it.
Logged

du24pont24

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 39
  • Last login:April 30, 2017, 12:49:56 pm
  • I have a CD100a Rowe Juke box.
Re: rowe cd100a wire harness problem
« Reply #2 on: March 13, 2016, 10:13:33 pm »
Where would I purchase the connector???  radio shack?   lowes??/ menards??? 
Is a web site I could buy from???   Thanks!!!

Derek
Logged
Derek
South Bend, IN, USA

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7400
  • Last login:Yesterday at 07:01:05 pm
  • I break stuff...then fix it...sometimes
Re: rowe cd100a wire harness problem
« Reply #3 on: March 14, 2016, 02:34:54 am »
I want to say JST XH series connector.  I'd have to dig up an manual to find out for sure.

A dataset for them can be found here...   

http://datasheet.octopart.com/XHP-4-JST-datasheet-8325564.pdf

Takes some measurements and compare them to see.


Ebay or mouser or any large electronics place would have them.

Logged
Pages: [1]
  
Go Up
« previous next »