Author Topic: Control Panel frame (what wood to use) (Read 2077 times)

gigido · « **on:** August 21, 2015, 08:26:03 pm »

Hi guys, I am building my control box and will be a sheet MDF for the top base, but was wondering what thickness and material you guys recommend for the frame of the control panel?

thanks.

EvilNuff · « **Reply #1 on:** August 24, 2015, 12:08:46 pm »

What do you mean by the "frame" of the control panel? The CP is usually just a box. You can use good quality plywood or the same MDF for the CP box. I would not go thinner than 1/2" but most use 3/4" i believe.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Control Panel frame (what wood to use) (Read 2077 times)

gigido

Control Panel frame (what wood to use)

EvilNuff

Re: Control Panel frame (what wood to use)