Author Topic: Kortek KT-2914f/Windows 10...won't sync booting up!!! (Read 1008 times)

Yoeddy1 · « **on:** August 15, 2015, 07:43:23 pm »

Hi guys,

I'm going nuts here. I have been running Windows Vista x64 for the past several years in my MAME cab. I have always had it set to 800x600. Just bought a new HDD and am installing Win 10 x64 Pro. When I boot up, my monitor won't sync up with the PC. I set the desktop resolution on another PC and LCD to 800x600 60hz and also tried 640x480 at 59hz before putting it in the cab. When I initially turn it on, it boots up to the Windows 10 desktop fine, but once I reboot it, something is throwing it out of whack and the monitor will never sync up again.

Any help would be greatly appreciated!

Thanks,
Jason

ark_ader · « **Reply #1 on:** August 16, 2015, 04:43:10 am »

Simple, go back to Vista. Most of us is ditching Windows 10 as it is pants.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Kortek KT-2914f/Windows 10...won't sync booting up!!! (Read 1008 times)

Yoeddy1

Kortek KT-2914f/Windows 10...won't sync booting up!!!

ark_ader

Re: Kortek KT-2914f/Windows 10...won't sync booting up!!!