Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: ami rowe r92 gripper arm problem  (Read 1721 times)

0 Members and 1 Guest are viewing this topic.

wa8tin2win

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:March 22, 2015, 08:41:23 pm
  • I want to build my own arcade controls!
ami rowe r92 gripper arm problem
« on: March 22, 2015, 07:19:49 pm »
Hi. Curt here just got this  jukebox have pinballs but i cant figure out why the gripper arm is not grabbing record, it sometimes grabbs it and records ends up half cocked on turnt@ble and even ends up in the bottom of case.
Also a good link for me to get a service manual would be appreciated  ..  any info would be great

Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: ami rowe r92 gripper arm problem
« Reply #1 on: March 22, 2015, 11:17:49 pm »
Service manual:

http://2nd-sight.com/victoryglass/ManualsFrame.htm

You want # 70-5769 (R-559) Rowe R-92 Field Service and Parts Manual, 184 pages, just $39.95
Logged

ami-man

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1085
  • Last login:July 19, 2020, 01:22:45 pm
Re: ami rowe r92 gripper arm problem
« Reply #2 on: March 24, 2015, 07:04:08 am »
Hi Curt,

Welcome to the forum.

You will need to remove the gripper bow assembly and fully strip it down and wash in warm soapy water to remove any traces lubrication, Dry off all of the parts and check for any wear or damage and then rebuild.

Regards
Alan
Logged
Pages: [1]
  
Go Up
« previous next »