Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Ultimarc Trackball and Golden Tee PCB Board  (Read 1353 times)

0 Members and 1 Guest are viewing this topic.

davijc02

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:September 24, 2015, 12:41:33 pm
  • I want to build my own arcade controls!
Ultimarc Trackball and Golden Tee PCB Board
« on: February 23, 2015, 02:14:17 pm »
Recently ordered an Ultimarc Utrak and am wondering if I will be able to connect this two a golden tee pcb and if so how would I go about doing it? Would I just splice the wires of does a harness exist in which I could use?

Thanks
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7515
  • Last login:Today at 03:50:10 pm
  • I break stuff...then fix it...sometimes
Re: Ultimarc Trackball and Golden Tee PCB Board
« Reply #1 on: February 23, 2015, 02:31:56 pm »
yep, it'll splice right in provided you bought the regular version and not the USB version.


Quote
Conn A Red   5 Volts
Conn A Black   GROUND
Conn A Purple   X1
Conn A Blue   X2
Conn B Red   5 Volts
Conn B Black   GROUND
Conn B Yellow   Y1
Conn B Green   Y2
Logged

davijc02

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:September 24, 2015, 12:41:33 pm
  • I want to build my own arcade controls!
Re: Ultimarc Trackball and Golden Tee PCB Board
« Reply #2 on: February 23, 2015, 02:39:53 pm »
I did buy the USB version. Think I can use wiretaps to splice in without cutting off the connector?
Logged

davijc02

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 16
  • Last login:September 24, 2015, 12:41:33 pm
  • I want to build my own arcade controls!
Re: Ultimarc Trackball and Golden Tee PCB Board
« Reply #3 on: February 23, 2015, 02:41:30 pm »
Also, this unit has two 5v wires and two grounds. I think the Happ that its intended for only had one of each ground and 5v. Would I just splice the two 5v volts together with the 5v wire from the golden tee pcb and same thing with the ground?
Logged
Pages: [1]
  
Go Up
« previous next »