Author Topic: WG 19" K7200 Standard Res Monitor and Golden Tee (Read 1576 times)

ntjedi · « **on:** December 16, 2003, 10:06:14 am »

I plan on using the monitor for both a PC and would like to be able to switch over to a Golden Tee PCB. Will this monitor work with Golden Tee? And from what I understand (please correct me if I am wrong) I should be able to get a cable with a montior connector (0.156 Center Headers) on one end and a JAMMA connector on the other, correct?

Am I missing anything here?

Or could you recommend another 19" monitor that I could use to accomplish this?

ntjedi · « **Reply #1 on:** December 16, 2003, 08:58:12 pm »

In case anybody is interested this is what I found out so far.

Standard resolution monitors are usable for GT up through 2K. All the GT Fores (2001-present) require medium resolution monitors.

The K7200 is a standard (CGA) monitor.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: WG 19" K7200 Standard Res Monitor and Golden Tee (Read 1576 times)

ntjedi

WG 19" K7200 Standard Res Monitor and Golden Tee

ntjedi

Re:WG 19" K7200 Standard Res Monitor and Golden Tee