Author Topic: Hantarex 9110 / crt_emu driver (Read 736 times)

mongo116 · « **on:** November 21, 2014, 03:36:35 am »

Hi, I am after some help and advice about how to setup my new cab. I have bought a j-pac and I am using an HD 4350 card. I have installed the crt_emu driver for Windows 7 (x64) and after running vmmaker and arcade_osd I can now see a stable picture on the Hantarex 9110. Out of all the resolutions available under arcade_osd none are interlaced and the highest vertical resolution I can choose is 240. Any ideas on why there are no interlaced resolutions showing? I have checked the vmmaker.ini and cannot see anything in there that would change this.

Thanks...

mongo116 · « **Reply #1 on:** November 22, 2014, 01:54:17 pm »

I have now resolved the issue I was having. I have now installed Windows XP, reinstalled the CRT_emu driver and can now select 640x480 etc when using arcade_OSD...


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Hantarex 9110 / crt_emu driver (Read 736 times)

mongo116

Hantarex 9110 / crt_emu driver

mongo116

Re: Hantarex 9110 / crt_emu driver