Was able to get some more body work knocked out and did the primary construction on the playfield - this is the one that I will pack up and send North next week but dropped it into the build so I could see how it will look once complete.
![](http://forum.arcadecontrols.com/index.php?PHPSESSID=g3hoqh16qjbdkjpd0an4k68us5&action=dlattach;topic=136713.0;attach=323663;image)
Detail of ball return on the back side, used some bondo to finish out the funnel I needed to ensure the ball goes down to the ball gate each time. The next is the PF with vinyl applied and guide holes punched. Then is was short work with the palm router and a laminate trimmer bit to clean it all up nice and purdy.
Back of the PF, the five sided shape is the back stop of the ball return with guide holes drilled for LEDs. Also not installed are the switches we'll be using, but the panel slides out and those are an easy install - minus the wiring assache.
Decided to go with silver for the engraved logo, I like it. Also, used the original sideart as a custom back door piece since I'm reworking the sideart for now.
I'm also still playing with the CPO so I haven't printed that yet, and I need to do a bunch of other detail stuff (custom stickers, warnings, labels, tags etc) but I am just really pleased with how it's looking so far. Of course, once the electronics are done I'll need to cut out the white from the bezel score area but didn't want to fiddle with that for now.