CNC Cut Bartop Kits - Orders Open! New Models Available!

[HaRuMaN]

About soul draw, they are located in China, but I usually get my orders about 2 weeks after placing them.

For side art, I get the black adhesive vinyl sticker. For marquees, I get the backlit pvc film.

[TKW4rr10r]

For side art, I get the black adhesive vinyl sticker. For marquees, I get the backlit pvc film.

Thank you for that, had no clue what the different styles were when reading the site.

[HaRuMaN]

Yeah, they have a ton of different stuff there...

[HaRuMaN]

New designs coming next week:

Pedestal, mini virtual pin, and Nintendo inspired bartop

[Rick]

New designs coming next week:

Pedestal, mini virtual pin, and Nintendo inspired bartop

No full size pin? /sadpanda

[TKW4rr10r]

New designs coming next week:

Pedestal, mini virtual pin, and Nintendo inspired bartop

Uh oh Rick, I may have to go local for my Nintendo Bar-top. We'll see how the two compare
I kind of owe HaRuMaN an order after his work on the Atari model, after all.

I'll add a 2nd LCD to that request of yours (17" + 19") as compensation when I start shipping parts again, if it's any consolation.
Not like anyone will have a hard time selling them 

[Rick]

Uh oh Rick, I may have to go local for my Nintendo Bar-top. We'll see how the two compare.

No worries, sir! Save the cost on the shipping, for sure! From the pics alone, you can't question Haruman's build quality.

I'll add a 2nd LCD to that request of yours (17" + 19") as compensation when I start shipping parts again, if it's any consolation.

I appreciate the offer, but I won't hold you to that. It's business, and I totally understand the decision.

Not like anyone will have a hard time selling them.

I hope so!

[HaRuMaN]

New designs coming next week:

Pedestal, mini virtual pin, and Nintendo inspired bartop

No full size pin? /sadpanda

If I can keep it under 150 lbs... 

[Brian74]

Wall mount jukebox, something that looks better then that north coast custom one. Dual screen goodness!

Sent from my SGH-M919 using Tapatalk 2

[HaRuMaN]

Midway cocktail with alternate black top (add $20):

[HaRuMaN]

Wewt

[yotsuya]

Midway cocktail with alternate black top (add $20):

How much for the map of the 50 states?

[Malenko]

How much for the map of the 50 states?

tooooo late! I already called dibs.

[yotsuya]

How much for the map of the 50 states?

tooooo late! I already called dibs.

Awwwww man!!! I got cash in hand for that potato chip on the floor!

[HaRuMaN]

Midway cocktail with alternate black top (add $20):

How much for the map of the 50 states?

$500

[HaRuMaN]

That's a toy potato chip, btw.

[yotsuya]

So does that, like, raise the price?

[HaRuMaN]

So does that, like, raise the price?

Indeed

[Rick]

So does that, like, raise the price?

Indeed

Just so you know, I'm including a snack pack with all of my kits. Yes, that's right.

Mine are all that ... and a bag of chips.

[HaRuMaN]

Yes, but I include free pipe insulators that can be used to help keep pipes from bursting in those cold winter months!

[yotsuya]

So do those of us doing local pickup get the free pipe insulators? Or is that shipping only?

[HaRuMaN]

So do those of us doing local pickup get the free pipe insulators? Or is that shipping only?

Shipping only!  Makes for great edge protecting for the melamine.

[Malenko]

So do those of us doing local pickup get the free pipe insulators? Or is that shipping only?

Shipping only!  Makes for great edge protecting for the melamine.

great idea, just like pool noodles. 

[HaRuMaN]

 

[Rick]

Not too shabby. How large is the marquee on that puppy?

[HaRuMaN]

Not too shabby. How large is the marquee on that puppy?

Roughly 4" X 17.75" viewable

[Rick]

Roughly 4" X 17.75" viewable

Sweet deal! When do you hope to have yours complete? (I only ask, since you stole one of my customers away, and I hope he doesn't have to wait too long.)

[yotsuya]

Just picked up my 5th (!) HaRuMaN Special (2nd cocktail). The  man is a pleasure to deal with. If you're on the fence, don't be afraid to pull the trigger. Quality stuff here.

[HaRuMaN]

Just picked up my 5th (!) HaRuMaN Special (2nd cocktail). The  man is a pleasure to deal with. If you're on the fence, don't be afraid to pull the trigger. Quality stuff here.

 

Thanks man!  Making chufftember's possible since 2012!

[TKW4rr10r]

Nice!
I would recommend something though, and extend the CP panel a bit to sit on top of the front panel, or reposition them. The nintendo cabs had that look and this way one could add the t-molding to match:


This is just going off the CNC sketch and not seeing a completed unit, though. Awesome work as always.

[HaRuMaN]

The control panel does sit directly on top of the control panel, the yellow pockets you see on the sides are for the batons the co will rest on.

[HaRuMaN]

Roughly 4" X 17.75" viewable

Sweet deal! When do you hope to have yours complete? (I only ask, since you stole one of my customers away, and I hope he doesn't have to wait too long.)

It's ready to be cut now, I have the estimate back from my CNC shop.  For black melamine, it's going to be the same cost as the vertical ($190 shipped with slots cut).  Another customer requested it made out of cabinet grade baltic birch plywood, that's going to be $230 shipped with slots cut.

[HaRuMaN]

Fun with sketchup... 

[HaRuMaN]

@TKW4rr10r, I finally figured out how to move my parts around in Sketchup, so here are a couple of 3D renders to help you visualize:

Front profile:



And the back:

[Rick]

You missed a spot.

[HaRuMaN]

You missed a spot.

You're killin' me.  Where?

[Rick]

You're killin' me.  Where?

I'm mostly just jibin' ya, man. BUT, when I looked to the Popeye bartop as well as the actual Nintendo cabs, I noticed there's an unused panel above the control panel... On my design, I made it like an inch and a half. It's purely cosmetic, so really, it's a "to each his own" kinda thing.

Your design looks GREAT. I wouldn't change a thing. (Personally, I like the way yours will support the monitor more vertically. I've noticed most of the true cabs - if not all of them - have a HUGE angle on the monitors.)

[HaRuMaN]

You're killin' me.  Where?

I'm mostly just jibin' ya, man. BUT, when I looked to the Popeye bartop as well as the actual Nintendo cabs, I noticed there's an unused panel above the control panel... On my design, I made it like an inch and a half. It's purely cosmetic, so really, it's a "to each his own" kinda thing.

Your design looks GREAT. I wouldn't change a thing. (Personally, I like the way yours will support the monitor more vertically. I've noticed most of the true cabs - if not all of them - have a HUGE angle on the monitors.)

I gotcha.  Yeah, I plan on the bezel coming down all the way to the control panel.  As far as the monitor goes, I like more vertical, about 80 degrees, but with the way the kit is designed, and the room available, the angle can be adjusted to whatever the customer wants. 

[TKW4rr10r]

@TKW4rr10r, I finally figured out how to move my parts around in Sketchup, so here are a couple of 3D renders to help you visualize:

Yeah that makes a lot more sense. The original drawings threw me off, don't know what I was seeing 

[HaRuMaN]

Rick better look out now, I'm unstoppable!