Author Topic: CNC Cut Bartop Kits - Orders Open! New Models Available! (Read 657828 times)

HaRuMaN · « **Reply #720 on:** September 20, 2013, 01:49:08 pm »

Quote from: Rick on September 20, 2013, 01:43:24 pm

With all the money you make from these kits, please consider investing in a better camera.

Awesome work, man!

Lol. All the money from the kits, so far, has been going into new kits for the most part. I have a good camera, cell phone is just more convenient!

TKW4rr10r · « **Reply #721 on:** September 20, 2013, 06:02:08 pm »

I'm curious how a 16:10 22" LCD would work in one of those, or is the width too much for the cabinet? It would be 22 1/8" width.

yotsuya · « **Reply #722 on:** September 20, 2013, 06:19:39 pm »

You can see how tight the setup is. Not sure a widescreen that big will fit.

steved61 · « **Reply #723 on:** September 20, 2013, 08:21:53 pm »

Any news on the pedestal design?
Steved61

Rick · « **Reply #724 on:** September 20, 2013, 08:46:32 pm »

Quote from: TKW4rr10r on September 20, 2013, 06:02:08 pm

I'm curious how a 16:10 22" LCD would work in one of those, or is the width too much for the cabinet? It would be 22 1/8" width.

I'd be interested in figuring out how much thinner this would be decased. If it was, maybe it would be closer to the allowable space...

HaRuMaN · « **Reply #725 on:** September 20, 2013, 08:47:54 pm »

Quote from: steved61 on September 20, 2013, 08:21:53 pm

Any news on the pedestal design?
Steved61

I believe I'll have a drawing finished next week... as well as another design that some have been asking for

Rick · « **Reply #726 on:** September 20, 2013, 08:49:53 pm »

Quote from: HaRuMaN on September 20, 2013, 08:47:54 pm

I believe I'll have a drawing finished next week... as well as another design that some have been asking for

Cautiously excited!

HaRuMaN · « **Reply #727 on:** September 21, 2013, 09:43:01 am »

Rick · « **Reply #728 on:** September 21, 2013, 09:49:30 am »

Quote from: HaRuMaN on September 21, 2013, 09:43:01 am

Oooo

yotsuya · « **Reply #729 on:** September 21, 2013, 12:17:08 pm »

It was very well received, HaRuMaN. Great job on the kit!

retrogamedude · « **Reply #730 on:** September 21, 2013, 06:07:31 pm »

I ordered a widescreen kit today

excited to work on my first arcade

HaRuMaN · « **Reply #731 on:** September 21, 2013, 06:12:41 pm »

Quote from: retrogamedude on September 21, 2013, 06:07:31 pm

I ordered a widescreen kit today excited to work on my first arcade

Excellent, your order has been added to the list at the CNC shop, and will probably be going out in a week or so.

retrogamedude · « **Reply #732 on:** September 21, 2013, 06:25:50 pm »

Quote from: HaRuMaN on September 21, 2013, 06:12:41 pm

Quote from: retrogamedude on September 21, 2013, 06:07:31 pm
I ordered a widescreen kit today excited to work on my first arcade

Excellent, your order has been added to the list at the CNC shop, and will probably be going out in a week or so.

Awesome glad you saw it, wasnt sure if there was anything else I needed to do. I look forward to putting it together!

tron84 · « **Reply #733 on:** September 22, 2013, 12:35:35 pm »

Quote from: HaRuMaN on September 21, 2013, 09:43:01 am

Oooo

That is the SHIOT !!!!

gorgeous man, very nice job.

Are you going to do a bezel for it?

HaRuMaN · « **Reply #734 on:** September 25, 2013, 02:23:05 pm »

Just another day in paradise...

Rick · « **Reply #735 on:** September 25, 2013, 02:27:10 pm »

Quote from: HaRuMaN on September 25, 2013, 02:23:05 pm

Just another day in paradise...

Wuzzat? Bartop back? Something new?

HaRuMaN · « **Reply #736 on:** September 25, 2013, 02:28:56 pm »

Quote from: Rick on September 25, 2013, 02:27:10 pm

Quote from: HaRuMaN on September 25, 2013, 02:23:05 pm
Just another day in paradise...

Wuzzat? Bartop back? Something new?

Nothing new, just the back to a widescreen kit. I actually got to the shop as he was wrapping up so I got see it in action for once.

retrogamedude · « **Reply #737 on:** September 25, 2013, 03:11:49 pm »

hopefully mine is in there somewhere

HaRuMaN · « **Reply #738 on:** September 25, 2013, 03:23:04 pm »

Quote from: retrogamedude on September 25, 2013, 03:11:49 pm

hopefully mine is in there somewhere

Actually, yes. 2 wides & a standard were picked up today.

Malenko · « **Reply #739 on:** September 25, 2013, 05:46:06 pm »

they are gonna flip when they see a pimped out vert.

HaRuMaN · « **Reply #740 on:** September 26, 2013, 10:12:20 am »

Quote from: Malenko on September 25, 2013, 05:46:06 pm

they are gonna flip when they see a pimped out vert.

It's gonna be sweet!

tron84 · « **Reply #741 on:** September 26, 2013, 12:38:38 pm »

Quote from: HaRuMaN on September 26, 2013, 10:12:20 am

Quote from: Malenko on September 25, 2013, 05:46:06 pm
they are gonna flip when they see a pimped out vert.

It's gonna be sweet!

Nice choice!!!!!

a mini Ms. Pac sweet

Malenko · « **Reply #742 on:** September 26, 2013, 01:57:45 pm »

Quote from: tron84 on September 26, 2013, 12:38:38 pm

Nice choice!!!!! a mini Ms. Pac sweet

Galaga and Reuinion art is next on the agenda

tron84 · « **Reply #743 on:** September 26, 2013, 09:51:39 pm »

Quote from: Malenko on September 26, 2013, 01:57:45 pm

Quote from: tron84 on September 26, 2013, 12:38:38 pm
Nice choice!!!!! a mini Ms. Pac sweet

Galaga and Reuinion art is next on the agenda

me waits in anticipation

I was waiting to see the Galaga version.... mini cab porn

is it wrong to be turned on by the mini's

Malenko · « **Reply #744 on:** September 27, 2013, 10:14:00 am »

heres a picture from my phone of the WIP in photoshop. Galaga art is done, Reunion art is almost done.

Rick · « **Reply #745 on:** September 27, 2013, 10:19:26 am »

Quote from: Malenko on September 27, 2013, 10:14:00 am

heres a picture from my phone of the WIP in photoshop. Galaga art is done, Reunion art is almost done.

Very, very nice! And damn. I was going to make my Galaxy model into a Galaga bartop. Damn, damn, damn. (I guess I'll just have to paint my cab sides WHITE now...)

A tip of my hat to you, sir. I can't WAIT to see yours complete.

Malenko · « **Reply #746 on:** September 27, 2013, 10:36:54 am »

or you can paint it black and get Haruman to print you the ones I sent him

Rick · « **Reply #747 on:** September 27, 2013, 10:38:28 am »

Quote from: Malenko on September 27, 2013, 10:36:54 am

or you can paint it black and get Haruman to print you the ones I sent him

Oh no, I'm not taking your sloppy seconds. I'm going a whole other direction now.

Malenko · « **Reply #748 on:** September 27, 2013, 10:41:42 am »

Well, spoiler, I was working on Galaxian art too and its almost done. :/

tron84 · « **Reply #749 on:** September 27, 2013, 11:30:35 am »

Quote from: Malenko on September 27, 2013, 10:14:00 am

heres a picture from my phone of the WIP in photoshop. Galaga art is done, Reunion art is almost done.

KIller work man

very nice.....
That Galaga & Ms Pac are going to be F*in sweet man.

I was going to ask Haruman where he got that printing done. Well now I know he printed it.

nice galaxian too

HaRuMaN · « **Reply #750 on:** September 27, 2013, 11:45:32 am »

I get my stuff printed at Soul Draw, great quality, great price...

tron84 · « **Reply #751 on:** September 27, 2013, 11:53:53 am »

Quote from: HaRuMaN on September 27, 2013, 11:45:32 am

I get my stuff printed at Soul Draw, great quality, great price...

ahh ok, Malenko made it sound like you printed it.
I was like daumn Haruman is a lil Macgyver

HaRuMaN · « **Reply #752 on:** September 27, 2013, 11:57:14 am »

Quote from: tron84 on September 27, 2013, 11:53:53 am

Quote from: HaRuMaN on September 27, 2013, 11:45:32 am
I get my stuff printed at Soul Draw, great quality, great price...
ahh ok, Malenko made it sound like you printed it.
I was like daumn Haruman is a lil Macgyver

Hehe. If I had a large chunk of change I'd be my own arcade game shop...

Wants:
CNC Router
Large Format Printer
Plasma Cutter
Metal Brake
Laser Engraver

tron84 · « **Reply #753 on:** September 27, 2013, 12:13:38 pm »

Quote from: HaRuMaN on September 27, 2013, 11:57:14 am

Quote from: tron84 on September 27, 2013, 11:53:53 am
Quote from: HaRuMaN on September 27, 2013, 11:45:32 am
I get my stuff printed at Soul Draw, great quality, great price...
ahh ok, Malenko made it sound like you printed it.
I was like daumn Haruman is a lil Macgyver

Hehe. If I had a large chunk of change I'd be my own arcade game shop...

Wants:
CNC Router
Large Format Printer
Plasma Cutter
Metal Brake
Laser Engraver

It would be nice to have all that

I would just be happy with an big arcade

Like in the golden age type a real one

TKW4rr10r · « **Reply #754 on:** September 28, 2013, 06:15:44 pm »

Quote from: HaRuMaN on September 27, 2013, 11:45:32 am

I get my stuff printed at Soul Draw, great quality, great price...

Well that's bookmarked now

May need to pick your brain on ordering from them eventually.

Rick · « **Reply #755 on:** September 28, 2013, 06:31:33 pm »

Quote from: HaRuMaN on September 27, 2013, 11:45:32 am

I get my stuff printed at Soul Draw, great quality, great price...

Which product is it you're using. The vinyl sticker?

p.s. The site is AWESOME. Thanks!

macattack · « **Reply #756 on:** September 28, 2013, 06:43:17 pm »

Interesting vinyl site, grammar on the pages is however atrocious !! Lol

WWW.Xtremepinball.com

Malenko · « **Reply #757 on:** September 28, 2013, 08:44:44 pm »

Quote from: macattack on September 28, 2013, 06:43:17 pm

Interesting vinyl site, grammar on the pages is however atrocious !! Lol

My guess was not a native English speaker. Still, its better than my Chinese.

retrogamedude · « **Reply #758 on:** September 28, 2013, 10:01:59 pm »

Any chance mine will be shipping soon? Need to request a few days off work so I can build it

HaRuMaN · « **Reply #759 on:** September 28, 2013, 10:05:00 pm »

Quote from: retrogamedude on September 28, 2013, 10:01:59 pm

Any chance mine will be shipping soon? Need to request a few days off work so I can build it

I got all the slot cutting finished today, these will be shipping out Monday. FedEx home is what I use so you are looking at around 4 days shipping time.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news