October 06, 2024, 04:53:36 am
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Software Support
|
controls.dat
(Moderator:
SirPoonga
) |
Servo Stick and LED-Blinky (in Hyperspin)
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Servo Stick and LED-Blinky (in Hyperspin) (Read 12508 times)
0 Members and 1 Guest are viewing this topic.
Endprodukt
Trade Count:
(
0
)
Full Member
Offline
Posts: 702
Last login:
Today
at 01:59:07 am
I want to build my own arcade controls!
Servo Stick and LED-Blinky (in Hyperspin)
«
on:
February 01, 2013, 03:08:24 pm »
LedBlinky is supposed to work with the Servo Stick but it just doesn't switch between 4/8-way. I activated it through the led blinky configurator under "misc" but it's still not switching. Am I missing something?
Logged
arzoo
Trade Count:
(
+1
)
Full Member
Offline
Posts: 2093
Last login:July 08, 2024, 02:31:42 pm
Robots WILL kill you.
Re: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #1 on:
February 07, 2013, 12:18:52 pm »
Hi,
Turn on the Debug Log and Verbose options (on the Misc Options tab), start your FE and run a game or two that should be 4-way and 8-way. Email me the debug.ZIP file and I'll take a look.
Logged
Robots
will
kill you.
Arcade Addiction
Endprodukt
Trade Count:
(
0
)
Full Member
Offline
Posts: 702
Last login:
Today
at 01:59:07 am
I want to build my own arcade controls!
AW: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #2 on:
February 08, 2013, 11:15:23 am »
Its working now, thanks
Logged
Nephasth
Guest
Trade Count:
(
0
)
Re: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #3 on:
February 08, 2013, 12:17:02 pm »
Please share what the issue was. Might help out others some day.
Logged
Endprodukt
Trade Count:
(
0
)
Full Member
Offline
Posts: 702
Last login:
Today
at 01:59:07 am
I want to build my own arcade controls!
AW: Servo Stick and LED-Blinky (in Hyperspin)
«
Reply #4 on:
February 08, 2013, 12:48:34 pm »
I'm not sure actually. I activated the servo stick in the ledblinky config and it didn't switch. I tried the software from ultimarc and it worked right away but still not through led Binky and hyperspin. It worked after a system reboot just fine. I had to adjust my default configuration for mame to 8 way Joysticks and set it to primary so any unknown game would use it. I really like that ledblinky sets to 4way in hyperspin
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Software Support
|
controls.dat
(Moderator:
SirPoonga
) |
Servo Stick and LED-Blinky (in Hyperspin)