Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Qix plastic overlay buttons question  (Read 1481 times)

0 Members and 1 Guest are viewing this topic.

iscariot

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 316
  • Last login:June 14, 2022, 02:00:34 pm
Qix plastic overlay buttons question
« on: January 28, 2013, 12:10:06 pm »
Hey folks.  I'm restoring a Qix control panel...I wanted to make a clear plastic overlay for it and so I did some basic measurements and it seems to fit fine except that one of the two buttons is a little sticky now.  Is there an easy way to fix this? 

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13999
  • Last login:April 09, 2024, 07:27:18 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Qix plastic overlay buttons question
« Reply #1 on: February 04, 2013, 12:58:09 pm »
Hey folks.  I'm restoring a Qix control panel...I wanted to make a clear plastic overlay for it and so I did some basic measurements and it seems to fit fine except that one of the two buttons is a little sticky now.  Is there an easy way to fix this?

dish washer
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.