Author Topic: Intergraph 27" monitor (Read 1894 times)

microwrx · « **on:** November 02, 2003, 11:54:39 pm »

Hi folks.

Has anybody tried using one of these monitors before. I have just obtained one and need to know the easiest way to get it connected. It is an MDSP1280A and it looks as though I'm going to need a special video card for it. It uses a 13W3 connector so I'll at least need an adaptor.

thanks
JJ

Tailgunner · « **Reply #1 on:** November 03, 2003, 03:56:35 am »

Found this, though it shows the MDSP1280A using a normal HD-15 connector.

http://www.monitorworld.com/Monitors/intergraph/mdsp1280a.html

From the specs they have, you might get away with a simple 13w3 to HD 15 cable.

microwrx · « **Reply #2 on:** November 04, 2003, 03:08:02 am »

Thanks, I had seen that page. These things definitely come with a 13W3 so I don't know where they got their info. I ended up ordering a 13W3 to HD15 adaptor and a video card from these guys:

http://www.si87.com/MonitorSolutions/intergraph/mdsp1280a.html

$142 including shipping to Australia so not too bad plus the card will run any fixed or multi-frequency/sync monitor for the future.

Just getting the adaptor would only work with a Mac apparently.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Intergraph 27" monitor (Read 1894 times)

microwrx

Intergraph 27" monitor

Tailgunner

Re:Intergraph 27" monitor

microwrx

Re:Intergraph 27" monitor