Author Topic: 27" Vision Pro Monitor Help (Read 1365 times)

Byte Knight · « **on:** October 11, 2003, 03:43:18 pm »

I just got a new 27" Vision Pro Monitor from Happ Controls. The monitor looks good except for a light area several inches in diameter at about 10:00 when the monitor is on. It is most noticeable when the color is red and this area shows up purple. I've tried degaussing several times with no improvement. There are no speakers nearby and the problem persists if I move the monitor. Any suggestions?

Thanks

Todd

Pixelhugger · « **Reply #1 on:** October 24, 2003, 01:20:27 pm »

Have you tried tilting it at an angle? Say 45 deg? I know some image abberations have been solved with the WG 9200 that way. Sorry...that's all I've got $:-\$

Pixelhugger · « **Reply #2 on:** October 24, 2003, 01:23:42 pm »

Have you tried tilting it at an angle? Say 45 deg? I know some image abberations have been solved with the WG 9200 that way. Sorry...that's all I've got $:-\$


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 27" Vision Pro Monitor Help (Read 1365 times)

Byte Knight

27" Vision Pro Monitor Help

Pixelhugger

Re:27" Vision Pro Monitor Help

Pixelhugger

Re:27" Vision Pro Monitor Help