Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: 1967 Rowe AMI MM-3 no audio one channel  (Read 2308 times)

0 Members and 1 Guest are viewing this topic.

fastball

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:October 09, 2012, 01:16:58 pm
  • I want to build my own arcade controls!
1967 Rowe AMI MM-3 no audio one channel
« on: October 09, 2012, 11:56:38 am »
I have a 1967 Rowe AMI MM-3 with one channel of audio missing. I do not have a service manual or schematics, nor do I really have all the equipment needed to troubleshoot properly (oscilloscope to see where the signal stops would be great to own but I do not have one).

What area is a common problem on the amp? I have verified the pre-amped input signal (via RCA connectors) from the tone arm is good on both channels, and I've verified both of my speakers are good. I have narrowed it down to somewhere in the amplifier case. The filter caps are all original so that may be something I should replace anyway.

Any help would be appreciated. Thanks.
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: 1967 Rowe AMI MM-3 no audio one channel
« Reply #1 on: October 09, 2012, 06:35:59 pm »
That amplifier is certainly old enough to need recapping.
Logged
Pages: [1]
  
Go Up
« previous next »