Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: neo geo mvs 4-slot restoration/customization  (Read 4793 times)

0 Members and 1 Guest are viewing this topic.

armature

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:September 12, 2012, 11:15:35 pm
  • Will work for arcade parts.
    • ZeroSignal
neo geo mvs 4-slot restoration/customization
« on: August 09, 2012, 01:43:46 pm »
I've lurked on the forums a bit recently and collected a ton of useful information over the last few months. Last month I decided I would pull the trigger and pick up a NEO GEO.


Note: Buying an arcade machine from a warehouse auction is probably better done in person than online....lesson learned. haha



So I have a LOT of work ahead of me. Battery mod will likely be done this weekend while I have the system torn apart to rebuild the control panel. (hopefully all my pieces come in by tomorrow or Saturday at the latest). I went for convex LED buttons instead of the standard solid concave ones. I'm really looking forward to getting those in asap.

I started a page on Facebook to follow the restoration process. I'll probably cross-post between there and here with more of the photos being listed there.
http://www.facebook.com/media/set/?set=a.370871612978596.83720.216627025069723&type=1

I was hoping someone might be able to give me guidance on one of these pieces. Someone spilled soda all over the control panel quite a long time ago. When I took the unit apart I noticed that one of the credit counters had some damage to the LED area. Totally superficial. From what I could tell, it didn't cause an issue with the functionality of the piece and I don't recall seeing any issues when it was displaying...however, it's sticky and will likely harm the new overlay if I don't clean it...so, a) what can/should I clean that with? and b) think sharpie would be fine to touch that area up after cleaning?

I appreciate the input and look forward to sharing the restoration with you.

jasonl2972

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 61
  • Last login:July 15, 2015, 12:26:14 am
Re: neo geo mvs 4-slot restoration/customization
« Reply #1 on: August 13, 2012, 03:08:49 am »
nice machine,i have the exact one i picked up about 8 months or so ago and have learned alot about it.of all my cabs its my favorite and will never leave my game room.Good luck with it and enjoy the fun you'll have restoring it.i'll be looking forward to updates on it.
Games I own. -Neo Geo 4 slot-Sega Turbo Outrun-Space Gun-Sega Hang on-World Series Baseball-Q-bert-V Ball-Magic Sword-Asteroids-Namco sticker club-Touch master 7000-Claw machine-Slot machine

armature

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:September 12, 2012, 11:15:35 pm
  • Will work for arcade parts.
    • ZeroSignal
Re: neo geo mvs 4-slot restoration/customization
« Reply #2 on: August 13, 2012, 03:17:40 am »
I actually made some decent progress this weekend.

I took apart the control panel and came face to face with a nasty mess of rust but it was totally salvageable.



This is how it currently looks. I just need to wait til tomorrow for the paint to fully dry so I can wet sand and hit it with a couple shots of clear.



Also, since I was already digging around inside, I removed the motherboard and checked the battery. Turns out this unit already had its battery replaced with a rechargeable coin cell battery so that's all good. I popped the cover off, sanded it down then hit it with some red, replaced the PCB feet and here's the result:



I still need to get some white vinyl logos to place on the cover but I think it looks sweet.

armature

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:September 12, 2012, 11:15:35 pm
  • Will work for arcade parts.
    • ZeroSignal
Re: neo geo mvs 4-slot restoration/customization
« Reply #3 on: August 22, 2012, 02:10:09 pm »
control panel is complete. I need to rewire the memory card unit and get it installed asap and then figure out what my next step will be.


boerbiet

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:October 19, 2012, 11:15:34 am
Re: neo geo mvs 4-slot restoration/customization
« Reply #4 on: September 12, 2012, 09:02:10 am »
Wow, that looks quite awesome :applaud: