Author Topic: Free player button graphics ALL GONE (Read 32567 times)

Nannuu · « **on:** September 29, 2003, 11:27:47 pm »

Sorry didn't want to put this in Buy/Sell/Trade as it is none of those, it is free.

I had some white vinyl player button graphics made to try out on different colored buttons. It seems to work really well but I'm not sure about an extended durability with multiple button mashings. They may peel off over time. I made two styles of guys, solid and distinct arms and legs. The 3 and 4 player guys ended up too big to fit on buttons so I am going to make more soon $:-\$ But as soon as I get another batch made I will be offering them for free so you can apply them to your buttons. If anyone is interested please email or PM me so I can start filling out the envelopes. If you want more than one set please make note.

I plan on having the correct size guys in a few weeks so it may be a while before I send anything.

Added by moderator from one of Nannuu's later messages :

The tutorial for weeding and installation can be seen here:
You can also get the graphic file in AI format here as well.

http://www.willyliliana.com/Mame%20Cabinet/Button%20Stickers.htm

RandyT · « **Reply #1 on:** September 30, 2003, 01:23:46 am »

Quote from: Nannuu on September 29, 2003, 11:27:47 pm

Sorry didn't want to put this in Buy/Sell/Trade as it is none of those, it is free.

I had some white vinyl player button graphics made to try out on different colored buttons. It seems to work really well but I'm not sure about an extended durability with multiple button mashings. They may peel off over time.

If you used regular, good quality sign vinyl, I expect they will last a LOOOOONG time considering the infrequent pressing of those buttons compared to normal ones.

Nice gesture.

RandyT

J_K_M_A_N · « **Reply #2 on:** September 30, 2003, 12:46:21 pm »

You could also use those protective button covers since they aren't frequently used buttons. Then they should last forever. Also, that is very cool of you to offer those for free.

J_K_M_A_N

SirPoonga · « **Reply #3 on:** October 01, 2003, 03:24:38 am »

I'd take some.

I notice the men aren't the same. Some have seperated legs and some don't

J_K_M_A_N · « **Reply #4 on:** October 01, 2003, 12:50:28 pm »

Quote from: Nannuu on September 29, 2003, 11:27:47 pm

I made two styles of guys, solid and distinct arms and legs.

Nothing gets past you, SirP! It must be the thought of the Wild on your mind! THE WILD ROCK!

J_K_M_A_N

Nannuu · « **Reply #5 on:** October 07, 2003, 11:12:18 pm »

I just thought I'd mention that someone asked to have some hockey guys made for his buttons. I'll be adding the hockey guys to the cut file as well.

If anyone else wants a custom graphic for their buttons please send me the artwork or .eps file so I can add it in there.

I'll be sending the file on Monday (10-13).

armad1ll0 · « **Reply #6 on:** October 08, 2003, 02:31:17 am »

can you make one for a single girl and one with a man and a woman?girls are also in the webdings font.

SirPoonga · « **Reply #7 on:** October 08, 2003, 03:02:46 am »

or the trucker mud guard naked chick?

Nannuu · « **Reply #8 on:** October 08, 2003, 09:21:32 pm »

Sure I'll add a few sets of the female, female/male and mud guard chicks.

delta88 · « **Reply #9 on:** October 09, 2003, 01:10:34 am »

OMG!!!! that would rock so much.. the trucker mud flap girl and a guy and a girl.. how about in black for a white button? I am sure that if the stiker was applied and then sprayed or coated with a type of clear it would be A ok..

so.. um.. can I get a hook up or at least what they are printed on and how they are cut?

thx again!!!

Nannuu · « **Reply #10 on:** October 09, 2003, 02:25:29 am »

Ok this is what I have so far. I'll try to get them cut in black as well. The ladies arms/toes are extremely small as is the hockey stick, I'll be amazed if they come out of the cutter/weeded/applied undamaged, but hey, it's worth a try!

Delta88,
They will be cut out of high quality 3M sign vinyl. Given that they are very small they may be prone to tearing off since really they are just stickers, very good stickers mind you, but stickers nonetheless.

EDIT:
hmmm, maybe I should change the 3 player guy/girl to be 2 girls and 1 guy, much more appealing that way.....

Wienerdog · « **Reply #11 on:** October 09, 2003, 02:39:49 am »

LOL, would these buttons be appropriate?

Nannuu · « **Reply #12 on:** October 09, 2003, 02:53:40 am »

Sure I'll add it in!

Wienerdog · « **Reply #13 on:** October 09, 2003, 02:56:21 am »

Quote from: Nannuu on October 09, 2003, 02:53:40 am

Sure I'll add it in!

Holy cow those are awsome! I sat there with that image for an hour and you whip it out in 10 minutes. Thanks.

armad1ll0 · « **Reply #14 on:** October 09, 2003, 04:19:58 am »

since you have a row of men only can you do the P1 as a single woman then
man and woman, then threesome... etc...

You are too awesome, funny....

CthulhuLuke · « **Reply #15 on:** October 09, 2003, 05:25:11 am »

Actually I'm very interested, although I dont have Adobe Illustrator on me so I cant put together an EPS file for this one, but I'll just post the. jpg. Would it be possible to get 2 of these biohazard stickers, and a set of those 1p, 2p, 3p, 4p stickers?
If its a go I'll PM you my address and owe you a Control panel overlay or a custom marquee *I've got decent artwork skills in Photoshop*
-Chu
Btw: you can just mail these in an envelope cant you, so there shouldnt be any shipping charges right?

Goggles · « **Reply #16 on:** October 09, 2003, 09:16:24 am »

I'd take some!

I've bought the package over ebay from X-Arcades and picked up 2 of the joysticks and 20 black pushbuttons w/ microswitches and caps, but wanted the 1 and 2 player buttons, the white 1 and 2 player vinyl stickers would be amazing

Here's a few more icon ideas that some ppl may like/want:

Wienerdog · « **Reply #17 on:** October 09, 2003, 10:48:50 am »

Quote from: CthulhuLuke on October 09, 2003, 05:25:11 am

Btw: you can just mail these in an envelope cant you, so there shouldnt be any shipping charges right?

lol, yes, you just drop and envelope in the black box out front and it shows up wherever you want it to go. jk, I know what you are getting at.

I'll rephrase your question for you:
I really appreciate you doing this! Assuming this is US to US, will it only cost you $.37 to send these?

tmasman · « **Reply #18 on:** October 09, 2003, 11:11:05 am »

LOL!!!
The playboy bunny would bring a whole new meaning to "Player 1" & "Player 2"...
I like it... I don't want them (My wife would kill me), but I like it...

~ tmasman

Safron · « **Reply #19 on:** October 09, 2003, 11:34:30 am »

How about some cool icons for a "Pause" and "Esc" button (command buttons)?
Sorry, I suck at Photoshop

SirPoonga · « **Reply #20 on:** October 09, 2003, 01:33:40 pm »

Quote from: SirPoonga on October 08, 2003, 03:02:46 am

or the trucker mud guard naked chick?

You know I was just joking, but I like it.

SpamMe · « **Reply #21 on:** October 09, 2003, 01:38:45 pm »

Quote from: Safron on October 09, 2003, 11:34:30 am

How about some cool icons for a "Pause" and "Esc" button (command buttons)?

I'll second that. I'd like to see "Pause", "Exit", and "On/Off"

nighthawk2099 · « **Reply #22 on:** October 09, 2003, 01:45:37 pm »

Quote from: SirPoonga on October 08, 2003, 03:02:46 am

or the trucker mud guard naked chick?

I really like the 4 player one...

Lilwolf · « **Reply #23 on:** October 09, 2003, 04:14:55 pm »

I would LOVE to get ahold of some!

Let us know when you are going to get them. I'll drop a few buck in there for you... especially if you are looking at having to order a second sheet!

the naked chicks are GREAT I don't know if my wife would like them as much as I would... But !@# it... I have to hide my cabinet in my office anyway!

SirPoonga · « **Reply #24 on:** October 09, 2003, 04:20:39 pm »

Quote from: SpamMe on October 09, 2003, 01:38:45 pm

Quote from: Safron on October 09, 2003, 11:34:30 am
How about some cool icons for a "Pause" and "Esc" button (command buttons)?
I'll second that. I'd like to see "Pause", "Exit", and "On/Off"

for pause could use the VCR pause or paws. Exit, I can only think of the arrow pointing out an open door. On off, the circle with a line through it that I see on my monitor.

Aceldamor · « **Reply #25 on:** October 09, 2003, 10:56:38 pm »

I would pay a few bucks for a sheet....but only if you can add the single player female graphic to it..

Nannuu · « **Reply #26 on:** October 09, 2003, 11:24:00 pm »

To clear things up a bit, my parents own a sign shop in Utah and are visiting next weekend so I am going to send them a file to cut and bring with them. They end up with nice scraps from their large format printer that are only really useful for small jobs. Most of the time spent in a sign shop is artwork, weeding and application, the cutting is fast. Since I will weed and send to you all to apply I've wasted very little of their time. Thus free for me, free for you and many useless scraps not gone to waste

I will not be masking the vinyl, it will be easier for you to apply with some nice clear Scotch tape. I'll post a small tutorial on my website next week. hmm well maybe the week after as The Matrix Reloaded comes out on Tuesday....much watch every night....

My only cost is envelope shipping .37 which isn't all bad

MiKman · « **Reply #27 on:** October 09, 2003, 11:53:25 pm »

I would send some cash for a small sheet of a few of the examples you posted here. To pay for shipping and such.

MiKman

eRA186 · « **Reply #28 on:** October 10, 2003, 01:50:39 am »

the playboy graphic would be great if it could be done.that would be the ultimate.play on player!

SpamMe · « **Reply #29 on:** October 10, 2003, 02:55:02 am »

Quote from: SirPoonga on October 09, 2003, 04:20:39 pm

Quote from: SpamMe on October 09, 2003, 01:38:45 pm
Quote from: Safron on October 09, 2003, 11:34:30 am
How about some cool icons for a "Pause" and "Esc" button (command buttons)?
I'll second that. I'd like to see "Pause", "Exit", and "On/Off"

for pause could use the VCR pause or paws. Exit, I can only think of the arrow pointing out an open door. On off, the circle with a line through it that I see on my monitor.

Oooh, yeah. Here's what google turned up:

paigeoliver · « **Reply #30 on:** October 10, 2003, 06:27:01 am »

How about Pump and DDR arrows?

The Pump arrows are Up-left, up-right, down-left, down-right, and a square. While the DDR arrows are up, down,left, and right (and I think some versions also use some of the Pump arrows as well).

I would be totally down for a set of Pump arrows to put on buttons.

IG-88 · « **Reply #31 on:** October 10, 2003, 09:44:02 am »

Nannuu, If you put your return address on the packages/envelopes you send, I'm sure that most of us could at least send you some stamps back.
What the hell, I'll even send you some extras.

mpm32 · « **Reply #32 on:** October 10, 2003, 09:56:02 am »

We should just send him a self addressed stamped envelope. Would save him the stamp and having to write out all the addresses.

nighthawk2099 · « **Reply #33 on:** October 10, 2003, 10:05:10 am »

Good Idea..... I'm up for it.... Tell me when, and the evelope is in the mail.

A sheet with all the examples would be great....

How do you plan to arrange the images on the sheets ?

How many images per sheet ?

xar256 · « **Reply #34 on:** October 10, 2003, 10:26:37 am »

I'd love to get in on this as well. As I'm in Canada, I would be more than happy to send a self addressed stamped envelope to you for this.
Personnally, I'd love the player 1-4 buttons, but p1-4 Mortal Kombat decals to put on colored buttons would really Rock too!!! <I'm trying to plan a dragon themed cabinet> The other exampes are cool, but I would want to waste too much of your "stock"

Btw, here's another vote of Thanks for doing this!
Xar256

DjinniMan · « **Reply #35 on:** October 10, 2003, 11:19:14 am »

I'd love to have just a player 1 and player 2. I'll take whatever you have leftover after requests, except for the trucker chicks. I'm sure the wife would veto those!

I'll send a self addressed stamped envelope and some extra stamps, too. Just tell me where to send.

Thanks so much! I'm sure we all appreciate it!

DJ

SirPoonga · « **Reply #36 on:** October 10, 2003, 11:33:01 am »

Quote from: DjinniMan on October 10, 2003, 11:19:14 am

I'll take whatever you have leftover after requests, except for the trucker chicks. I'm sure the wife would veto those!

Oy, she's got you on a leash, huh?

DjinniMan · « **Reply #37 on:** October 10, 2003, 01:39:41 pm »

Quote from: SirPoonga on October 10, 2003, 11:33:01 am

Quote from: DjinniMan on October 10, 2003, 11:19:14 am
I'll take whatever you have leftover after requests, except for the trucker chicks. I'm sure the wife would veto those!
Oy, she's got you on a leash, huh?

Guilty as charged! Gotta love it that she is cool with having a giant yellow arcade machine in the house, though. "As long as it has Centipede!" she says. Not a problem!

DJ

Nannuu · « **Reply #38 on:** October 11, 2003, 04:14:21 am »

Alright this is what I have so far. I will mostly have players 1-4 cut and much less of all the rest. And some sets of black as well.

I pulled the arrows and PS symbols from Frosty's vectorized graphics in the vector library....thanks Frost!

If you feel the need to send an envelope and stamp I'd be much obliged, but if you don't, no worries. Sorry I haven't replied to any of the requests either, I figure I'll reply when I have them ready to send.

Will Turnbow
4604 Marguerite Lane
Fort Worth, TX 76123

Any more custom graphics to add?

?

Spaced Invader · « **Reply #39 on:** October 11, 2003, 08:17:53 am »

I feel guilty asking for these. you say "free" but they have to be costing you something. I'd buy these by the sheet myself just to have spares. I'm doing some machines for kids and symbols help. Ever think of sellin 'em? I mean if someone wanted a lot...

Anyway, I'm interested in the playstation graphics, a pause and an exit symbol. And a lot more but like I said...feelin guilty.

Have you thought about a credit symbol? Maybe the outline of a quarter, or a dollar/cent sign. I know I'd be interested for one.

Thanks for all the work you put into this. It's people like you that make this hobby fun...that and the games.

Goggles · « **Reply #40 on:** October 11, 2003, 08:34:50 am »

I'd don't suppose I can get just a sheet of the normal non-arm and non-feet showing 1-4 player versions? ie. a couple of them like 4x P1, P2, P3, and P4?

I'd gladly pay you via paypal $2 or something.

Hoe · « **Reply #41 on:** October 11, 2003, 11:10:56 pm »

Quote from: Spaced Invader on October 11, 2003, 08:17:53 am

Have you thought about a credit symbol? Maybe the outline of a quarter, or a dollar/cent sign. I know I'd be interested for one.

I think that would be a really good idea. I think the dollar/cent signs would be best. If you do make thouse, you could add some of thouse to my order?

(I'm HoeBot@HotMail.com).

I'll mail you some stamps next time I pick some up.

SirPoonga · « **Reply #42 on:** October 22, 2003, 03:22:02 pm »

So what's the status on this?

armad1ll0 · « **Reply #43 on:** October 22, 2003, 03:57:42 pm »

I'm up for paypaling you a couple of bucks as well.

_Iz- · « **Reply #44 on:** October 22, 2003, 06:33:15 pm »

I would love a sheet of these as well please, let me know when they're ready to go...

Thanks!

Nannuu · « **Reply #45 on:** October 22, 2003, 06:42:03 pm »

I got the sheets cut and am in the process of weeding them. My wife's family is here for the week as well so progress is
slow... Uh, really slow. It'll probably be next week before I start sending anything out.

Thanks for your patients guys!
Nannuu

nighthawk2099 · « **Reply #46 on:** October 22, 2003, 07:54:15 pm »

Let us know how much we can "donate

" for doing this great deed....

Zakk · « **Reply #47 on:** October 22, 2003, 10:28:56 pm »

Look at all the response! Why not make up a sheet of useful Mame icons and sell them? Do a poll, and select the most usefull graphics that could be used on buttons or on underlay graphics, and offer em up? I'm sure I'd be interested in a few sheets to use on the cabs I do, and it might end up being more useful than a sheet of "do a fire hydrant and a walrus and maybe some chickens, yeah 4 chickens" (sorry fellas)

Considering it doesn't look like you want to charge a fortune for these things, you might do quite well selling them. With the way people are salivating over them already (myself included) I don't think you'll have any trouble moving a few units

SpamMe · « **Reply #48 on:** October 23, 2003, 02:03:20 am »

Nannuu, I'm out of stamps. Can you post your paypal address here (assuming you've got one)?

planetjay · « **Reply #49 on:** October 23, 2003, 02:08:55 am »

Quote from: Nannuu on September 29, 2003, 11:27:47 pm

The 3 and 4 player guys ended up too big to fit on buttons so I am going to make more soon $:-\$

Why not put them on the CP ABOVE the buttons? Also you should post or PM your PayPal ID so people (I) can pay you for a sheet or 2 of those new labels. What's the per sheet price shipped (mailed)?

NIVO · « **Reply #50 on:** October 23, 2003, 08:37:57 am »

How about a space invader(1) and then (2) for the 2 player icon and so forth? thanks.

Spaced Invader · « **Reply #51 on:** October 23, 2003, 12:08:05 pm »

Quote from: Zakk on October 22, 2003, 10:28:56 pm

Look at all the response! Why not make up a sheet of useful Mame icons and sell them? Do a poll, and select the most usefull graphics that could be used on buttons or on underlay graphics, and offer em up? I'm sure I'd be interested in a few sheets to use on the cabs I do, and it might end up being more useful than a sheet of "do a fire hydrant and a walrus and maybe some chickens, yeah 4 chickens" (sorry fellas)

Considering it doesn't look like you want to charge a fortune for these things, you might do quite well selling them. With the way people are salivating over them already (myself included) I don't think you'll have any trouble moving a few units

I agree, I'd love to get my hands on a couple sheets now; and more in the future. I know you don't look at this as a business, and you probably wouldn't make a ton of money on this...but you could cover your costs, make a little extra cash, and TONS of good will. Just a thought for your consideration. Anyway, even if you don't want to continue/expand production, it's great that you're doing this...and I for one couldn't appreciate it more.

Lumpy · « **Reply #52 on:** October 23, 2003, 01:23:48 pm »

I'd also be interested in a sheet of these. Please let us know what we need to do to help out your cause.

Nannuu · « **Reply #53 on:** October 23, 2003, 09:46:11 pm »

Sorry, no Paypal. I'm really not worried about money though guys, I just thought I'd give a run a try to see if the stickers work and to make a contribution to the board members. If everyone gives them a try and likes them and they don't peel off too easily I'll probably set up a standard sheet to send out. Heck they may turn out to be crap when put on regularly used buttons

To be honest I'll probably have to charge a couple dollars for the next run if this is successful because of the amount of time it takes to weed the sheet since the graphics are so small. Charging would have more to do with my wife whining from no attention and getting no return for the lost "family" time

Well, back to weeding......

Nannuu · « **Reply #54 on:** November 07, 2003, 04:15:09 am »

Alright I think I finally have enough done to start sending them out! I have one more sheet of 1-4 players to work on but I can do that if more are wanted. I'll have the envelopes in the mail this weekend and a small tutorial on my site Sunday.

Thanks to the guys that sent SASEs and a little extra!

*ATTN* Dave Weizenegger! I've received your emails and replied needing your address to send the hockey stickers. Please PM me with your address as it seems the email isn't working?

Nannuu · « **Reply #55 on:** November 07, 2003, 04:17:07 am »

couple previews

Nannuu · « **Reply #56 on:** November 07, 2003, 04:19:09 am »

one more

paigeoliver · « **Reply #57 on:** November 07, 2003, 04:41:02 am »

YES, you made dance arrows!!! Please say you are sending me a set of dance arrows. Please!!!

SpamMe · « **Reply #58 on:** November 07, 2003, 05:35:28 am »

Those look incredible, I can't wait

p.s.: what's weeding?

RandyT · « **Reply #59 on:** November 07, 2003, 07:31:59 am »

Quote from: SpamMe on November 07, 2003, 05:35:28 am

p.s.: what's weeding?

See that little white void in the vinyl that is the eye of the PB Bunny? Somebody has to manually pull that tiny piece of vinyl out of there.

Weeding is the removal of all vinyl material that is not part of the design you want to keep. Little stuff like the above can be a major, time consuming PITA.

RandyT

STL_Steve · « **Reply #60 on:** November 07, 2003, 12:05:32 pm »

Dude, I would love to have a sheet of these and more than happy to send some money your way via paypal or even money order. Let me know if you have enough and I will take a couple.

mpm32 · « **Reply #61 on:** November 07, 2003, 12:27:40 pm »

Nannuu, you are way too nice. Send them out unweeded and let us weed them ourselves.

armad1ll0 · « **Reply #62 on:** November 07, 2003, 02:23:45 pm »

Dude, you are way awesome.

I just want to send you some Paypal cash and avoid the SASE.

Where do I send it? Please PM me...

jcoleman · « **Reply #63 on:** November 07, 2003, 02:31:46 pm »

Quote from: mpm32 on November 07, 2003, 12:27:40 pm

Nannuu, you are way too nice. Send them out unweeded and let us weed them ourselves.

They probably recycle the unused vinyl.

John

tsaavik · « **Reply #64 on:** November 07, 2003, 02:50:01 pm »

WOOT! $ and Cent signs!!!!!!!!!!

YEAH!!!!!!! You rock dude!

SpamMe · « **Reply #65 on:** November 07, 2003, 03:34:39 pm »

Quote from: RandyT on November 07, 2003, 07:31:59 am

Quote from: SpamMe on November 07, 2003, 05:35:28 am
p.s.: what's weeding?

See that little white void in the vinyl that is the eye of the PB Bunny? Somebody has to manually pull that tiny piece of vinyl out of there.

Weeding is the removal of all vinyl material that is not part of the design you want to keep. Little stuff like the above can be a major, time consuming PITA.

RandyT

OMG what are you doing to yourself man! Just cut them into squares and have us do it for our own stickers instead. Crazy bastid

Nannuu · « **Reply #66 on:** November 09, 2003, 11:04:39 pm »

Alright I have the tutorial done.

http://www.willyliliana.com/Mame%20Cabinet/Button%20Stickers.htm

I still have lots'o'stickers left if any are needed

SirPoonga · « **Reply #67 on:** November 09, 2003, 11:26:37 pm »

Cool, instructions.

armad1ll0 · « **Reply #68 on:** November 10, 2003, 01:22:10 am »

your contributions to this community really are something to be thankfull of.

I wish we could give him an award.

The Man · « **Reply #69 on:** November 10, 2003, 10:19:59 pm »

Quote from: Nannuu on November 09, 2003, 11:04:39 pm

Alright I have the tutorial done.

http://www.willyliliana.com/Mame%20Cabinet/Button%20Stickers.htm

I still have lots'o'stickers left if any are needed

I would love some. Please check your PM.

Thanks,
TM

slycrel · « **Reply #70 on:** November 10, 2003, 10:45:51 pm »

Hey Nannuu, what sign shop do your parents own? My wife worked in ths sign business for a few years in the Provo area (well, actually in Lehi). Just curious.

I might want a sheet of those, but I'll let oyu know later. I'm not too far into the production stage of things, still designing my cab. =)

The Man · « **Reply #71 on:** November 11, 2003, 12:13:23 am »

Quote from: slycrel on November 10, 2003, 10:45:51 pm

Hey Nannuu, what sign shop do your parents own? My wife worked in ths sign business for a few years in the Provo area (well, actually in Lehi). Just curious.

I might want a sheet of those, but I'll let oyu know later. I'm not too far into the production stage of things, still designing my cab. =)

I'm in South Jordan

Brad Lee · « **Reply #72 on:** November 12, 2003, 01:09:43 am »

Quote from: Nannuu on November 09, 2003, 11:04:39 pm

Alright I have the tutorial done.

http://www.willyliliana.com/Mame%20Cabinet/Button%20Stickers.htm

I still have lots'o'stickers left if any are needed

Looks great, I PM'd ya a few days ago
THanks!

SirPoonga · « **Reply #73 on:** November 13, 2003, 03:04:45 pm »

I got mine! cool. But I found one problem that for your next batch you can do. I forgot to post the Atari start button figures. That's actually what I want. I totally didn't think about it until now. My volcano buttons are going on my future cocktail cabinet. Need the atari Y stick figure for that!

For an example look at a digdug or centipede control panel.
http://mamefans.metropoliglobal.com/down/Museum/Upright1-C/Centipede/Control1.jpg

Anyway, I will used these for my upright. They are pretty cool.

Edit: Trying to apply them.
Ok, I followed the instructions. The dollar sign is extremely hard to do without ripping the thin bar. Word of warning to people. Same witht he exit sign. The thin door frame tends to misshappen as you put it on the button.

SpamMe · « **Reply #74 on:** November 13, 2003, 07:38:32 pm »

Received my buttons today too. Had some trouble making sure I didn't apply them crooked (and failed), but hey, the buttons rotate

Nannuu · « **Reply #75 on:** November 13, 2003, 09:21:10 pm »

Deoh, I'm sorry should've mentioned the difficulty on some of those. My next batch will definitely be more structured. Meaning I'll have them cut as a full set on a single sheet. Also by adding multiple $ and cent signs to each set since I'm assuming that most panels have more than one coin in. And I would like to adjust some of the graphics to make them more durable. Like the Exit symbol, I'm fairly certain it is going to get stretched or torn on just about every panel. I think by making the door thicker or rounding out the border will do the trick

I hope everyone has good luck applying them!

SpamMe · « **Reply #76 on:** November 13, 2003, 10:11:25 pm »

I had absolutely no problem applying the exit symbol. Do you expect them to deteriorate over time?

Nannuu · « **Reply #77 on:** November 13, 2003, 11:10:13 pm »

They won't deteriorate over time, but fingers rubbing over the exit button's thin lines will probably mess them up. The thicker graphics like the player buttons should be fine for a long time though.

SirPoonga · « **Reply #78 on:** November 14, 2003, 02:07:54 am »

Thicker lines would help.
I don't like proposal 2 because it wouldn;t work well if oyu didn't put it on buttons like I have done.,

Would you be up to adding in the Atari Y player start Symbols to?

eRA186 · « **Reply #79 on:** November 14, 2003, 02:27:58 am »

the atari y players would be nice! proposal #2 on the escape sign gets my vote.

Lumpy · « **Reply #80 on:** November 14, 2003, 08:49:59 am »

Just wanted to say thanks and they look great. Can't wait to see what you come up with next.

Lilwolf · « **Reply #81 on:** November 14, 2003, 10:21:33 am »

Ahh... I didin't look at this thread for a few weeks and you are already shipping!

Any left?

I would LOVE to get whatever sets I could.

Also, did you ever setup a paypal account for shipping + extra expenses for your time / effort?

MiKman · « **Reply #82 on:** November 17, 2003, 06:23:55 pm »

WOW I got my graphics today. Talk about going above and beyond! Thanks so much and if there is anything I can do for you, just ask... I totally appreciate what you did for the BYOAC guys and the hobby in general. I haven't applied my graphics yet, but I'm sure your tutorial will come in handy.

Thanks again Nannuu

MiKman
(all the way from the great white north)

eRA186 · « **Reply #83 on:** November 17, 2003, 10:43:16 pm »

thanks my man.just got them today they look great!!! i would like to also thank your wife for letting you do all these graphics for all of us(i know how it is "you don't spend enough time with me ......so on and so on....) and by the way thanks again!

Valiam Arkais · « **Reply #84 on:** November 18, 2003, 09:13:59 am »

I hope I can catch a copy next batch you ship.

They look awsome.

-VA

Nannuu · « **Reply #85 on:** November 18, 2003, 01:14:08 pm »

Quote from: Valiam Arkais on November 18, 2003, 09:13:59 am

I hope I can catch a copy next batch you ship.

They look awsome.

-VA

I still have some, just PM me your address. I ran out of Power, Cent, Dollar and Exits but still have P1-P4, P1-2, male and female.
And I still have some P1-P2 of the trucker women if anyone wants a set.

Lilwolf · « **Reply #86 on:** November 18, 2003, 01:18:52 pm »

I just got mine

they look GREAT! Thanks SO much! Great idea!

Now I'm wondering what buttons to put them on... I feel bad about using them on anything but new buttons..... I have to place an order for some buttons worthy of these!

_Iz- · « **Reply #87 on:** November 18, 2003, 01:26:44 pm »

Just got mine too, they're fantastic! Many thanks Nannuu!

WiZeR · « **Reply #88 on:** November 19, 2003, 06:58:53 am »

nannuu: will you be making any more of these? I might be interested in buying bulk if you can supply to the UK.

Thanks

Malachai · « **Reply #89 on:** November 19, 2003, 11:01:02 am »

Thanks Nannuu! They look great.

scooter · « **Reply #90 on:** November 19, 2003, 09:33:13 pm »

Color me weird, but I would like to see 1 and 2-player stickers that look like Coke bottles. Perhaps the following could be a start (as I couldn't find anything good after a 15-minute Google search).

I don't have any (usable) photo-editing software to doctor this, and chances are it would not look that good after I was done anyway. Maybe someone can spend 5 minutes on it to make it presentable.

Great job and thanks for you efforts, Nannuu!!!

-Scooter

Nannuu · « **Reply #91 on:** November 19, 2003, 10:12:18 pm »

Uh, weird yes. However if you had said Pepsi.....

Anyway, I'll add a few Coke bottles to the next batch. I tried to put in the Coke swirl but it just looked like a broken bottle $:-\$

eRA186 · « **Reply #92 on:** November 19, 2003, 11:15:46 pm »

how about a rebel sign for player one and the imperial sign for player two(from star wars if you don't know) or the same for the autobot sign and the decepticon sign.

just a thought anybody with me?

shmokes · « **Reply #93 on:** November 20, 2003, 03:02:50 pm »

Another thanks. How can someone with so much class be from Utah

They look great.

Thanks again,

Shmokes (I'm from Utah, by the way)

Aceldamor · « **Reply #94 on:** November 20, 2003, 03:28:50 pm »

I would love to get the 2 player graphics with the man and woman....I would be happy to donate some bucks to the cause.

I would like to be on the list for the next batch of all the other goodies also....PLEASE...

menace · « **Reply #95 on:** November 28, 2003, 05:49:02 pm »

Just a big thanks to NANNUU!!! Got my decals in the mail today--they look fantastic. Even the missus was impressed with the little man and woman icons! If there is anything I can do to repay you just name it!

thanks again!

WiZeR · « **Reply #96 on:** November 29, 2003, 01:59:49 pm »

hi Nannuu.

i asked before, is there any way you could get these to the UK? Bulk or otherwise? Or would it be possible for you to pass on the images for printing in the uk?

Thanks

Nerd Of Nerds · « **Reply #97 on:** November 30, 2003, 10:11:38 pm »

would you be able to do a b c and x y z gfx? this would certainly test the durability

... pac man designs would be cool... thanks !!!

Nannuu · « **Reply #98 on:** December 01, 2003, 01:22:08 am »

Quote from: WiZeR on November 29, 2003, 01:59:49 pm

i asked before, is there any way you could get these to the UK? Bulk or otherwise? Or would it be possible for you to pass on the images for printing in the uk?

Wizer,
Yep, I've sent a few to the UK already so that's no problem. Bulk as in 100 sets? I suppose I could, since they are a very thin vinyl I send them in a normal envelope. I can definitely email you the file that they were cut from too.

NoNs,
And yep, I'll do abc xyz and some pac stuff on the next run as well.

SirPoonga · « **Reply #99 on:** December 01, 2003, 11:53:08 am »

Where you going to try and do the atari style player graphics?

shmokes · « **Reply #100 on:** December 01, 2003, 01:40:06 pm »

Could you do VAN for a spy hunter button?

WiZeR · « **Reply #101 on:** December 02, 2003, 03:18:14 pm »

Quote from: Nannuu on December 01, 2003, 01:22:08 am

Quote from: WiZeR on November 29, 2003, 01:59:49 pm

i asked before, is there any way you could get these to the UK? Bulk or otherwise? Or would it be possible for you to pass on the images for printing in the uk?

Wizer,
Yep, I've sent a few to the UK already so that's no problem. Bulk as in 100 sets? I suppose I could, since they are a very thin vinyl I send them in a normal envelope. I can definitely email you the file that they were cut from too.

thanks for you're reply Nannuu. Are there any copyright rules for your work? if you were to send via snail mail, how much do you think this would be to London, England? if you were to send me the files how/where would i get them printed?

AGGIEZ · « **Reply #102 on:** May 28, 2004, 12:47:06 pm »

Is there any way you can add the Texas A&M logo? I'm going to do an A&M cab and this would be peeeeeeeeeeeeerfect.

AlanS17 · « **Reply #103 on:** May 28, 2004, 01:04:29 pm »

LOL go buy a bumper sticker from the bookstore!

AGGIEZ · « **Reply #104 on:** May 28, 2004, 02:01:40 pm »

Quote from: AlanS17 on May 28, 2004, 01:04:29 pm

LOL go buy a bumper sticker from the bookstore!

That would have to be one damn big button...

megashock5 · « **Reply #105 on:** May 28, 2004, 03:24:54 pm »

those look fantastic! do you still have any left?

If so, how can I get some from you? I'll spot shipping or whatever.

AlexC · « **Reply #106 on:** May 28, 2004, 05:18:50 pm »

I think he's out of them, I sent him an email a week or so ago with no reply.

But then again this is a post from last year, I guess I'm just too late $:-\$

AlanS17 · « **Reply #107 on:** May 28, 2004, 05:31:06 pm »

Quote from: AGGIEZ on May 28, 2004, 02:01:40 pm

Quote from: AlanS17 on May 28, 2004, 01:04:29 pm
LOL go buy a bumper sticker from the bookstore!

That would have to be one damn big button...

Oh I didn't realize you wanted it fit onto a button... my bad...

Nannuu · « **Reply #108 on:** May 28, 2004, 06:09:06 pm »

Sorry guys, been on vacation. I have yet to get through my home email but there is always time for BYOAC at work

. I did recently get some more cut. I haven't weeded them yet so I don't know how many I have but I definitely have enough for the current requests. PM or email your address and I'll send them.

AGGIEZ:
I'm sure I could do ATM but what would that represent? Power? I am going to visit my parents in July so I can get it cut then if you do want one.

gprime · « **Reply #109 on:** May 28, 2004, 06:50:36 pm »

Awesome.. I was going to ask a few months ago but I assumed this thing was overwith.

How much for shipping to Canada?

AlexC · « **Reply #110 on:** May 28, 2004, 07:13:10 pm »

Awesome !!!!

Instant Message sent.

Blakey · « **Reply #111 on:** May 28, 2004, 08:06:48 pm »

Nannuu, I just saw this thread, top job!
I'm in Australia, but I'd love to work out some way to get you something in exchange for some of these (a kangaroo perhaps?). I have a small panel that I'm mounting power, reset, volume, usb x2, tv out & headphones on. Would it be possible to get some black stickers made up about 15mm high to suit?

Basically I'd want a power symbol, some sort of reset one (lightning? dunno), either numbers from 1-11 (spinal tap ;-) or a series of increasing bars, the usb logo, a picture of a tv and some phones. A white pause and escape would also be wicked.

Actually, if you can also send me a few sheets I'll weed them and post them out to any Aussies & NZers that want them.

I can't do EPS but I can send you jpgs, emf or cad files.

missioncontrol · « **Reply #112 on:** May 28, 2004, 08:53:02 pm »

if any left count me in for a set...IM sent...

Nannuu · « **Reply #113 on:** May 29, 2004, 10:59:41 am »

Well that was quick. All sets are spoken for already.

Whether you are in Australia or Canada, please send your address. The graphics come in an envelope so it really isn't that expensive to ship.

AmericanDemon · « **Reply #114 on:** May 29, 2004, 11:44:29 am »

Quote from: Nannuu on May 29, 2004, 10:59:41 am

Well that was quick. All sets are spoken for already.

Damn.

flampoo · « **Reply #115 on:** May 29, 2004, 03:29:25 pm »

I'll jump on the bandwagon. Willing to pay or do whatever.

Magnet_Eye · « **Reply #116 on:** May 29, 2004, 07:22:13 pm »

Me too. Will we be seeing another run of these?

AGGIEZ · « **Reply #117 on:** June 01, 2004, 10:33:06 am »

Quote from: Nannuu on May 28, 2004, 06:09:06 pm

AGGIEZ:
I'm sure I could do ATM but what would that represent? Power? I am going to visit my parents in July so I can get it cut then if you do want one.

Nannuu - I would want them as the player one and player 2 buttons, but scratch the idea. Thanks though! So, what does a fella have to do to get a set of the Admin button stickers?!?

Goz · « **Reply #118 on:** June 01, 2004, 11:41:42 am »

Also interested in the set and or admin set as suggested.

-Goz

MameMe · « **Reply #119 on:** June 06, 2004, 03:14:30 pm »

Nannu...FYI...I sent you a PM with my address. I am willing to send you a few bucks for your time & stickers.

Thanks

Nannuu · « **Reply #120 on:** June 08, 2004, 12:58:25 pm »

I am heading to my parents over the July 4 weekend so I'll cut as many as I have time for. This will probably be my last run of these. I will also add a few more icons like volume, headphones, usb etc (as requested above).

If anyone is so inclined to throw money at me you can paypal me at:
willyliliana@charter.net
But I am not asking for money for the stickers, I'll send them money or not.

My home internet is also still down and email access is blocked from work

Aceldamor · « **Reply #121 on:** June 08, 2004, 01:20:55 pm »

Hey Nannu, can I get a run of the admin and other various icon sets? I would appreciate it.

AGGIEZ · « **Reply #122 on:** June 08, 2004, 01:23:30 pm »

I just sent you a couple bucks via PayPal for a set of the admin/player stickers. Thanks Nannuu!!!

Witchboard · « **Reply #123 on:** June 08, 2004, 01:36:06 pm »

Dropped you a PM on May 29th. Wasn't sure if you got it or not. Requested your address so I could send you a SASE.

Bumblebounces · « **Reply #124 on:** June 08, 2004, 04:01:36 pm »

I just sent a PM for SASE as well.

Thanks

Bumble

wakerlet · « **Reply #125 on:** June 08, 2004, 04:14:37 pm »

I also sent you a few bucks via PayPal for a set of the white (for use on dark buttons) admin/player stickers.

Thanks,
Todd

JackTucky · « **Reply #126 on:** June 08, 2004, 04:39:49 pm »

I paypal'd too. Thanks!

Art T.

AlexC · « **Reply #127 on:** June 08, 2004, 05:48:47 pm »

Paypall sent for some admin & player stickers.
Thanks alot Nannuu

sirwoogie · « **Reply #128 on:** June 08, 2004, 11:41:32 pm »

Set requested here to. PM and Paypal earlier today

Jedimonkey27 · « **Reply #129 on:** June 09, 2004, 08:31:42 pm »

Are there any more that I can request?

Goz · « **Reply #130 on:** June 13, 2004, 08:54:00 pm »

Sent PM and paypal.

-Goz

MrBond · « **Reply #131 on:** June 13, 2004, 11:12:06 pm »

WOW, these look great...if you have any left I would be very appreciative!! An on/off switch, p1, p2 buttons, $ and volume would be really all I need. If not, thanks for the offer anyway!
(PM'd my address)

Blakey · « **Reply #132 on:** June 17, 2004, 01:30:13 am »

Nannuu,
I've emailed my images to the address in your profile. Sorry for the delay.

As mentioned before, I volunteer to weed and post stickers to any other Aussies/NZers that want them. I'll start a thread asking for names/addresses when I have them on this side of the world.

Onji · « **Reply #133 on:** July 01, 2004, 02:07:02 pm »

I hope i'm not too late for this, I PM'd you Nannuu
Thanks.

Also if none are available, where does one go to get these cut?

Nefesis · « **Reply #134 on:** July 02, 2004, 05:15:38 pm »

Quote from: JeDI MAsTeR on November 19, 2003, 11:15:46 pm

how about a rebel sign for player one and the imperial sign for player two(from star wars if you don't know)

if you have time i second the star wars ideas... if not, well, you made a lot of great ones already. thank you!

Nannuu · « **Reply #135 on:** July 08, 2004, 10:07:40 pm »

I have the new sheets cut. I have no idea how many I did. I just cut until I ran out of scraps. This is the sheet everyone will get unless you had previously asked for something custom and I actually got it done. It will take a couple weeks before I get to weeding them.

If anyone wants the cut file, I'll be adding it to the tutorial page of how to install them this weekend. You can take the file to any local sign shop and they can cut them in any color. If you do make sure you get the thinnest vinyl they have, it is generally more resistant to wear.

www.willyliliana.com

Note: Yes SirPoonga, there are Atari men now.

Witchboard · « **Reply #136 on:** July 08, 2004, 10:35:58 pm »

Why do you go to the trouble of weeding them? If you're giving them away, let everyone weed thier own.

Nannuu · « **Reply #137 on:** July 08, 2004, 10:43:39 pm »

Most likely I'd have to send more out that way because they are kind of hard to weed. Besides it is a nice service to BYOACers. But if anyone insists on them right away and wants to weed their own I'll can send them.

Some guys spend countless hours making frontends, tutorials, webpages etc all for free for us. I like to contribute in some way.

Witchboard · « **Reply #138 on:** July 08, 2004, 10:53:13 pm »

I don't think it will kill anyone to wait. I just thought you were going way beyond the call. You've contributed either way. I can understand how doing it now will save you more time later.

Blakey · « **Reply #139 on:** July 08, 2004, 11:21:34 pm »

Quote from: Nannuu on July 08, 2004, 10:07:40 pm

I have the new sheets cut.

Looking very very nice. Those headphones are great. Do you have an image of the TV as well?

Nefesis · « **Reply #140 on:** July 09, 2004, 12:25:03 am »

alright i have a total newbie question. when someone says they pmed whoever, does pm stand for profile messaging?

AlexC · « **Reply #141 on:** July 09, 2004, 12:58:20 am »

They look really nice, can't wait.

monkeybomb · « **Reply #142 on:** July 09, 2004, 01:33:08 am »

Just sent a few bucks via paypal. I hope there's some left.

Nannuu · « **Reply #143 on:** July 09, 2004, 01:54:29 am »

Quote from: Nefesis on July 09, 2004, 12:25:03 am

alright i have a total newbie question. when someone says they pmed whoever, does pm stand for profile messaging?

If you click where it says Instant Message below the members name/pictures over there on the left you can send them a Private Message (PM). Thus Instant Message = Private Message. The top of the page will tell you if you have a new message.

Nannuu · « **Reply #144 on:** July 21, 2004, 11:28:07 pm »

Ok I have a final count. I have 80 sets I can send out. But I only have 4 weeded leaving me with the conclusion that I'm just going to send them out unweeded and make a small tutorial. My wife helped last time as a "family project" but for some reason that excuse just isn't working this time. Go figure

. <sigh>

I took the pics for the tutorial tonight and will be uploading and sending everything out this weekend. Sorry it has taken so long to figure out that I'm slow $:-\$ .

Nannuu · « **Reply #145 on:** July 21, 2004, 11:29:02 pm »

These are all spoken for but I thought they were cool. Star Wars, Transformers, Spy Hunter and Pacman.

Blurry pic...

JustMichael · « **Reply #146 on:** July 22, 2004, 12:53:53 am »

PM and Paypal sent.

Bgnome · « **Reply #147 on:** July 22, 2004, 09:32:30 am »

i sent paypal a while ago..
just checking in

CthulhuLuke · « **Reply #148 on:** July 24, 2004, 05:09:08 am »

I sent you a PM, didn't get word back but if you'd like paypal for your services just say so, I'd be happy to lend a few bucks to see some awesome player graphics on my nes cab.

Nannuu · « **Reply #149 on:** July 24, 2004, 10:49:01 pm »

CthulhuLuke PMed ya.

All of the stickers are officially spoken for. They will go out Monday!

Nannuu · « **Reply #150 on:** July 24, 2004, 10:51:56 pm »

The tutorial for weeding and installation can be seen here:
You can also get the graphic file in AI format here as well.

http://www.willyliliana.com/Mame%20Cabinet/Button%20Stickers.htm

Witchboard · « **Reply #151 on:** July 28, 2004, 06:03:17 pm »

Got mine in the mail today. Thanks so much.

Jedimonkey27 · « **Reply #152 on:** July 29, 2004, 10:59:39 am »

I got mine in the mail yesterday. Thanks a lot!

BTW:Weeding isn't hard at all, I used a pushpin and it worked great!

Bgnome · « **Reply #153 on:** July 29, 2004, 02:34:20 pm »

they look awesome! thanks!

SirPoonga · « **Reply #154 on:** July 29, 2004, 05:52:18 pm »

I got mine. However my milkmen don't have feet! Oh well, I have the ai file. Plus, thinking aobut it, for exit, I think I'd rather have a door with an arrow pointing out.

Pretty cool stuff. I'm not going to be using all the graphics, I might give the unused ones away here.

Nannuu · « **Reply #155 on:** July 29, 2004, 06:13:33 pm »

Excellent, I never thought about using a pushpin!

The exit dudes don't have feet. Arnie chopped them off?

Some of you have some extra smaller pieces in the envelope as well. So check before you toss the envelope.

CthulhuLuke · « **Reply #156 on:** July 29, 2004, 06:30:51 pm »

Wow, these things look awesome, I'm just about to apply them to my black competition pushbuttons. I actually got mine in the mail yesterday but it was so buried in the pile of junk mail I forgot about it.
Weeding with a pushpin is So simple btw, you can literally poke and lift the extra vinyl.
btw, when placing the 1up guy on competition pushbuttons, TRIPLE CHECK YOUR ACCURACY! I put my 1up guy way on the right, and the 2up guys slightly towards the right. I was fine with the 2up guy but I had to peel off the 1up guy and try another one, this time overcorrecting to the left which made it align perfectly.
-thanks a bunch Nannuu, these things are pretty awesome *as long as no one picks at em*

chopps · « **Reply #157 on:** July 29, 2004, 07:28:12 pm »

received my button graphics today! thanks so much, they look amazing.

SirPoonga · « **Reply #158 on:** July 30, 2004, 12:09:50 am »

Quote from: Nannuu on July 29, 2004, 06:13:33 pm

The exit dudes don't have feet. Arnie chopped them off?

Yep, here's a pic

Oh well, I got my atari dude. I almost have everything to get my cocktail cabinet started, just missing the cabinet

I didn't realize you put you put USB symbols on there too. That's going on my upright.

You are right, took pics off to save bandwidth

Nannuu · « **Reply #159 on:** July 30, 2004, 12:26:05 am »

Quote from: SirPoonga on July 30, 2004, 12:09:50 am

Quote from: Nannuu on July 29, 2004, 06:13:33 pm
The exit dudes don't have feet. Arnie chopped them off?

Yep, here's a pic Oh well, I got my atari dude. I almost have everything to get my cocktail cabinet started, just missing the cabinet

I didn't realize you put you put USB symbols on there too. That's going on my upright.

Ah, no worries. That piece is supposed to come out. See pic of fully weeded sheet above.

I must try this push pin idea you all speak of

JustMichael · « **Reply #160 on:** July 30, 2004, 01:32:59 am »

Got a link to the weeding instructions for everyone here incase on of them loses theirs?

SirPoonga · « **Reply #161 on:** July 30, 2004, 01:39:37 am »

JM, he posted it not to many threads ago. Full with illustrations and how to weed and apply them.

JustMichael · « **Reply #162 on:** July 30, 2004, 06:44:34 am »

Thanks. Sorry, I was so tired last night I missed it. I modified the first message to add it at the beginning of the thread.

Goz · « **Reply #163 on:** July 30, 2004, 08:57:30 am »

I recv'd mine yesterday and I have to say they look great.

Thanx Nannuu!

-Goz

missioncontrol · « **Reply #164 on:** July 30, 2004, 12:47:20 pm »

I got mine today...Thanks Nannuu!

enchntr · « **Reply #165 on:** July 30, 2004, 02:13:43 pm »

Also got mine...these look fantastic! Thank you so much.

I must say, this community is MUCH better than many other communities (outside of the arcade hobby) I've been a part of. Everyone is helpful and always willing to lend a hand. Thanks!

Ed

Onji · « **Reply #166 on:** July 30, 2004, 02:15:07 pm »

Oh man I really hope i was on the shipment list

spidermonkey · « **Reply #167 on:** July 30, 2004, 07:56:05 pm »

Got them yesterday

. Thanks Nannuu. You are a generous and helpfull asset to these boards.

Hoagie_one · « **Reply #168 on:** July 30, 2004, 11:22:22 pm »

i would just like to say thank you for the sheet. I had no idea, that getting in on it as late as i did that i would still be able to get a sheet.

thanks much.

they are sweet

GMZombie · « **Reply #169 on:** August 02, 2004, 12:24:29 am »

i would also like to say thanks for the item as well . they are great.

Onji · « **Reply #170 on:** August 02, 2004, 10:41:07 pm »

Got mine in today! Thanks so much Nannuu!

AGGIEZ · « **Reply #171 on:** August 03, 2004, 11:04:03 pm »

Nannuu, you're the man! Thanks for the stickers!! I'm giving away some of pixelhugger's Atomic MAME stickers if you want some.

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=22737&start=0

Blakey · « **Reply #172 on:** August 04, 2004, 02:25:42 am »

Thanks Nannuu, a fat envelope arrived today bursting with stickers. Starting a thread for the Aussies now.

menace · « **Reply #173 on:** August 04, 2004, 06:57:45 am »

Great job as usual Nannuu! Thanks a bunch!

MrBond · « **Reply #174 on:** August 04, 2004, 06:00:39 pm »

Just wanted to say thank you!

pointdablame · « **Reply #175 on:** August 04, 2004, 07:26:52 pm »

I just wanted to say thanks also. They look amazing. Can't wait to stick em on some buttons and put them to use

Thanks again.

froggerman · « **Reply #176 on:** August 06, 2004, 02:24:49 am »

Thanks so much for sending a sheet to me in Canada. They are great! Paypal is down for maintenance right now but I will send you some 'cash thanks' tomorrow.

Onji · « **Reply #177 on:** September 06, 2004, 09:59:03 pm »

Just wanted to post a pic of these graphics in use. Thanks again! I love em.

AGGIEZ · « **Reply #178 on:** September 07, 2004, 10:14:31 am »

What does the third black button from the left mean? The two arrows. Isn't that refresh..

Onji · « **Reply #179 on:** September 07, 2004, 10:16:31 am »

Yes, but I'm actually using that as my 'change emulator' button, its the closest one i could find to represent that


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Free player button graphics ALL GONE (Read 32567 times)

eRA186