Author Topic: Power connection to cab - first time build (for me) (Read 888 times)

b3dr0ck · « **on:** March 23, 2012, 09:00:09 pm »

I'm connecting power / building a new system. I'm a newb at this, so I don't even know what information would be helpful.

I'm building this cab. into a NEO GEO MVS. I have all of the parts. Power is run to the cab. There is a switch on the side of the cab. When you turn it on, the cab. light come one (light bulbs in the top).

So ... what do I connect next? I'm gonna have a WG25" monitor in it.

BobA · « **Reply #1 on:** March 23, 2012, 09:27:27 pm »

Take a look at this info, it may help you.

AC wiring

Jamma Harness

Jamma and Neo Geo Differences

b3dr0ck · « **Reply #2 on:** March 23, 2012, 09:54:14 pm »

Thank you. That is helpful.

So the picture I attached is my isolation transformer, needed for my monitor?

BobA · « **Reply #3 on:** March 24, 2012, 02:47:38 pm »

Yes the monitor AC has to be supplied thru the isolation transformer.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Power connection to cab - first time build (for me) (Read 888 times)

b3dr0ck

Power connection to cab - first time build (for me)

BobA

Re: Power connection to cab - first time build (for me)

b3dr0ck

Re: Power connection to cab - first time build (for me)

BobA

Re: Power connection to cab - first time build (for me)