| Main > Project Announcements |
| Bartop - "NEONCADE" |
| << < (4/10) > >> |
| firedance:
Didn't take a picture of all the parts, they all work great for "sanwa" clones :) was going to cut the sides today but er it's a little damp outside :badmood: |
| firedance:
Just a small update, borrowed a drill press from a friend, used 25mm and 30mm Forstner bits, mine from a case of 5 different sizes, got them a while back but never used them till now :) surprised myself how good the bits were, used a template from slagcoin.com, dont we all ;D CP size is 495mm x 218mm x 12mm. So it begins at last................. |
| firedance:
Wow, didn't realise it had been 2 months since i last did a little work on it :-[ got most of the parts routed to size, only took pictures of the side, which measures approx 440x540mm, the entire width will be about 530mm outside edges were routed at a 45 degree angle, first time i've used the router for this, turned out better than i expected. |
| firedance:
This is being worked on as i type...........................honest ;D |
| JDFan:
--- Quote from: firedance on August 19, 2015, 12:55:04 pm ---This is being worked on as i type...........................honest ;D --- End quote --- HAve you test fit the joysticks yet ??? -- ( looks to be very little depth in the CPO to fit them ) :dunno |
| Navigation |
| Message Index |
| Next page |
| Previous page |