| Main > Project Announcements |
| Bartop - "NEONCADE" |
| << < (3/10) > >> |
| firedance:
Wow, as it really been this long.......................... Real life and just being plain busy set my build back, well a while ::) changes have been made to the PC hardware and controls ;D will post again when i have pictures to share..........................................famous last words lol |
| firedance:
Hi All, My 'new' pc, well a used n dusty HP DC5800 core 2 duo (3.0ghz) SFF, 2gb ram, 500GB HD, DVD writer and Multi card reader all for £31 delivered ;D, at least with this setup "dead or alive" and similar 3D games on mame play spot on now :) The GFX card is a ATI HD6450 1GB that i had in my parts box. and to prove i'm really going for it this time, cut the MDF as well 8), will get some plans up when i can work them out from my scuffy doodles lol Looking around for a joypad encoder i got a bargain again from ebay, 2 joysticks, 16 buttons, 4 smaller buttons, all in white plus 2 "zero delay" encoders and wiring for £21.04 coming from china , should hopefully be here shortly :), did have the parts i posted previously but couldn't resist it for the price. |
| firedance:
Oh the 8' x 4' mdf sheet was a slight 'second', scruffy looking and a damaged corner for £3 from my local diy shop, just enough for 1 bartop and spares if needed or 2 bartops if I'm careful ;D |
| firedance:
Trying to keep costs down so a bit of a impulse buy - http://www.amazon.co.uk/gp/product/B0065RZG88/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 will have to router out a recess as the 12mm MDF is the full length of the threads,oops. |
| firedance:
Finally my package from China is here in the UK and out for delivery, will post pictures when it comes :) |
| Navigation |
| Message Index |
| Next page |
| Previous page |