Hey there,
I have a KI cab that had a sparking flyback... and no image
I ordered a cap kit and new FB (1242.5001) from Bob Roberts.
After capping and replacing the FB i noticed that the new one is missing a pin, like in this picture...
I started it up and it fired up to the test screen and comes up with an unstable image... and its making a crazy rythmic ticking / arcing sound, thats seems to be coming from higher up on the monitor area... I know its not the chassis arcing (i pulled it out of the frame and ran it), but i cant see any flash anywhere else.
It seems as if its coming from the neck or anode cap.
Went over the whole chassis for cold solder joints and the B+ is around 135v to 138v
I also, tried adjusting the FB screen control and it doesnt do anything (missing pin on FB ?)
Iv run out of ideas and cant find anything on the net about this. Could i have the wrong Flyback installed ?
Here is a video of what it does... You have to listed carefully... but you can hear the rapid arcing / poping.