| Main > Monitor/Video Forum |
| Nanao MS-2931 Chassis Problems |
| << < (5/6) > >> |
| clutch:
No neck glow at all. When I put the probe on the B+ it goes kind of crazy and sometimes counts down to 0. I've tried adjusting the B+ pot to different positions with no change. There are no sounds afterward. Only after it has been off for 20-30 seconds you can hear a faint click. |
| clutch:
Yeah, just tested the 2933 and it shows a constant 180-something. I tried the bad one again and it slowly counted down from 120-something. |
| lilshawn:
sounds like something is loading down the power supply... it seems like it's trying to startup, but the load is causing it to shutdown. --- Quote ---I've tried adjusting the B+ pot to different positions with no change. --- End quote --- that's kind of a bad thing. you really need the B+ to remain where it was, before everything went sideways on you... otherwise all sorts of other things can go wrong and it throws another wrench into the works... getting a proper B+ is now another thing you have to contend with. |
| clutch:
I was afraid of that. I put it back to where it was originally hopefully. I'm kind of at the mercy of Joey/Jomac now. I can't afford to send this back again. |
| grantspain:
have you run this with a proper game board that puts out a solid res |
| Navigation |
| Message Index |
| Next page |
| Previous page |