Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: What kind of screw should hold down backglass rail? (WMS sys 11)  (Read 1659 times)

0 Members and 1 Guest are viewing this topic.

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:March 31, 2024, 12:42:45 am
  • There's my post
    • RayB.com
My backglass does not line up vertically with my score displays . The metail rail at the bottom is held in with regular round-head philips screws. I'm thinking these are keeping the backglass from sitting lower in the rail channel.

Any other methods to adjust height of backglass or the "door" behind it?
« Last Edit: March 16, 2011, 01:57:17 pm by RayB »
NO MORE!!

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:March 31, 2024, 12:42:45 am
  • There's my post
    • RayB.com
Re: What kind of screw should hold down backglass rail? (WMS sys 11)
« Reply #1 on: March 16, 2011, 09:18:20 pm »
Yup, it is. And the metal tab that is attached to the lower right inside the backbox was bent downward, so I bent that back up. The lighting "door" needs to be lifted a bit now to secure into place, but now the scores are pretty much lining up correctly. Mostly.

*Can a mod merge this into my Road Kings thread?
NO MORE!!