Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: rowe r83 no sound on left channel ds1 broken what sort of globe can be used  (Read 2609 times)

0 Members and 1 Guest are viewing this topic.

aircm

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:January 17, 2011, 10:32:48 pm
rowe r83 no sound on left channel ds1 broken what sort of globe can be used
« on: July 21, 2010, 10:02:10 am »
Hey Guys, I was playing with my juke box and when switching from mono to stereo i noticed very little deference i have only had it a week and thought is sounded a bit odd, I came to realise that the left channel is not working. After further investigation on the amplifier i found a little lamp ds1 broken off the board near the volume control. There is also a ds2 which is still attached, there is no mention of this in the parts list i have does anybody know what this parts is and if that can cause this issue, it is near where the volume control plugs in.
« Last Edit: July 21, 2010, 10:18:55 am by aircm »
Logged

aircm

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 9
  • Last login:January 17, 2011, 10:32:48 pm
Re: rowe r83 no sound on left channel ds1 broken what sort of globe can be used
« Reply #1 on: July 22, 2010, 04:52:35 am »
I have it sorted, apparently on later models they used a 270ohm 1/4watt resistor instead
Logged
Pages: [1]
  
Go Up
« previous next »