Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Help with a mace:the dark age board  (Read 2353 times)

0 Members and 1 Guest are viewing this topic.

Solstar

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:February 21, 2024, 09:41:12 am
Help with a mace:the dark age board
« on: August 13, 2010, 07:07:15 am »
hi all,i have a mace dark age cabinet,but whenever i try to turn it on,nothing appears on screen,nor audio can be heard.i checked the board,and the leds together with the reference manual,and it appears that 3 leds that are near the processor,that are suppsoed to be turned on just for few seconds,than going off or blinking(according to the manual),are on,and again,according to the manual,it means they're in "processor reset" state,which i don't know what it means,nor the manual says what to do in case.any help?

Q*Bert_OP

  • Wiki Contributor
  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2089
  • Last login:October 25, 2012, 07:20:42 pm
  • Oh yes, we did!
Re: Help with a mace:the dark age board
« Reply #1 on: August 14, 2010, 12:42:06 am »
Check your voltages first. Midway games need 5.1vdc - 5.25vdc on the 5 volt line or strange things can happen, including failure to boot and or game crashes/resets.

WTB: The Grid by Midway (2001), looking for 2 or more complete games, and large marquee